Difference between revisions of "FAQ:Agent 38"

From Net-SNMP Wiki
Jump to: navigation, search
 
(Latest FAQ revision - preparing for 5.5 release)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
= The interface statistics for my subinterfaces are all zero - why? =  
+
= Does the agent support the RMON-MIB? =  
  
{{FAQ:Agent_38}}
+
<!-- NB:
 +
  There is a mismatch between the template numbering
 +
  for this entry, and the FAQ entries that refer to it.
 +
  This follows a review of the entries in the
 +
  Agent section.
 +
-->
 +
 
 +
{{FAQ:Agent_39}}
  
 
     [[FAQ:Agent]]
 
     [[FAQ:Agent]]
 
     {{FAQ:Agent}}
 
     {{FAQ:Agent}}

Latest revision as of 14:06, 15 June 2009

Does the agent support the RMON-MIB?

Not really.

There is an "Rmon" code module included within the agent source code tree, but this is best thought of as a template for the RMON-MIB statistics groups, rather than a full implementation.

With most MIBs, the hardest part of implementing the MIB is often getting hold of the data to report. This is definitely true of the RMON-MIB, which relies on gathering (and analysing) a potentially large quantity of network traffic. The Rmon code distributed with the Net-SNMP agent code avoids this problem, by using random data.

Some of the functionality of the RMON-MIB, such as the alarm and event groups, has since been superseded by the work of the DisMan IETF working group. The Net-SNMP agent does implement these (more general) MIB modules. But the statistics gathering aspects of the RMON-MIB are not readily available.

Note too that none of the core developers have any significant experience with this code, and the person who originally wrote it is no longer active on the mailing lists. So there's no point in asking on the lists whether these modules work or not. You've got the source - how badly do you need this functionality?

   FAQ:Agent
   
  1. What MIBs are supported?
  2. What protocols are supported?
  3. How do I configure the agent?
  4. How do I remove a MIB from the agent?
  5. I've installed a new MIB file. Why can't I query it?
  6. How do I add a MIB to the agent?
  7. What's the difference between 'exec', 'sh', 'extend' and 'pass'?
  8. What's the difference between AgentX, SMUX and proxied SNMP?
  9. What is the purpose of 'dlmod'?
  10. Which extension mechanism should I use?
  11. Can I use AgentX when running under Windows?
  12. How can I run AgentX with a different socket address?
  13. How can I turn off SMUX support?
  14. How can I combine two copies of the 'mib2' tree from separate subagents?
  15. What traps are sent by the agent?
  16. Where are these traps sent to?
  17. How can I send a particular trap to selected destinations?
  18. When I run the agent it runs and then quits without staying around. Why?
  19. After a while the agent stops responding, and starts eating CPU time. Why?
  20. How can I stop other people getting at my agent?
  21. How can I listen on just one particular interface?
  22. The agent is complaining about 'snmpd.conf'. Where is this?
  23. Why does the agent complain about 'no access control information'?
  24. How do I configure access control?
  25. How do I configure SNMPv3 users?
  26. The 'createUser' line disappears when I start the agent. Why?
  27. What's the difference between /var/net-snmp and /usr/local/share/snmp?
  28. My new agent is ignoring the old snmpd.conf file. Why?
  29. Where should the snmpd.conf file go?
  30. Why am I getting "Connection refused"?
  31. Why can't I see values in the UCDavis 'extensible' or 'disk' trees?
  32. Why can't I see values in the UCDavis 'memory' or 'vmstat' tree?
  33. What do the CPU statistics mean - is this the load average?
  34. How do I get percentage CPU utilization using ssCpuRawIdle?
  35. What about multi-processor systems?
  36. The speed/type of my network interfaces is wrong - how can I fix it?
  37. The interface statistics for my subinterfaces are all zero - why?
  38. Does the agent support the RMON-MIB?
  39. What does "klread: bad address" mean?
  40. What does "nlist err: wombat not found" (or similar) mean?
  41. What does "Can't open /dev/kmem" mean?
  42. The system uptime (sysUpTime) returned is wrong!
  43. Can the agent run multi-threaded?
  44. Can I use AgentX (or an embedded SNMP agent) in a threaded application?