Template:FAQ:Coding 05

From Net-SNMP Wiki
Revision as of 11:03, 23 October 2006 by Dts12 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is most likely the same problem as above. Mib2c takes the name of a MIB object, not the name of a file (or a MIB module). Try using the name of the MODULE-IDENTITY definition.

Another possibility is that the MIB may contain syntax errors. Try running it through 'snmptranslate' or a dedicated SMI validation tool (such as 'smilint' or the on-line interface at http://wwwsnmp.cs.utwente.nl/ietf/mibs/validate/)