TUT:snmpd configuration

From Net-SNMP Wiki
Revision as of 08:02, 22 June 2009 by Fidlej (Talk | contribs) (Described the basic snmpconf usage.)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Use command snmpconf to create a snmpd.conf file in the current directory:

% snmpconf
  1. Read none existing file.
  2. Choose to setup the snmpd.conf.
  3. Choose to setup the Access Control
  4. Choose to setup a SNMPv1/SNMPv2c read-only access community name
    1. community name: public
    2. network address to accept: localhost
    3. restricted OID [RETURN for no-restriction]:
  5. finished, finished, quit

Review and copy the created snmpd.conf file into /etc/snmpd/snmpd.conf or somewhere else where it will be found.