TUT:Configuring snmptrapd

From Net-SNMP Wiki
Revision as of 09:27, 17 March 2009 by Atstech (Talk | contribs) (Matching SNMPv2 OIDs)

Jump to: navigation, search

snmptrapd is a Net-SNMP application that lets operators receive SNMP notifications (informs and traps) and process them.

Configuring snmptrapd to allow traps in the door

By default, snmptrapd does not do anything with received notifications. You have to tell it what you want to receive notifications.

Configuring snmptrapd to accept SNMPv1 or SNMPv2c notifications

To receive SNMPv1 or SNMPv2c notifications you need to tell snmptrapd your community strings. The easiest way to do this is by using the authCommunity snmptrapd.conf configuration file token. For example, this line:

 authCommunity log,execute,net public

Will let snmptrapd process notifications received using the "public" community string. Those notifications may be logged, allowed to trigger executable actions (see below), and resend data to the network (forward).

Configuring snmptrap to accept SNMPv3 notifications

SNMPv3 adds security to the SNMP protocol and is a safer way to receive notification data. But, it's a bit more complex to set up. Configuration of SNMPv3 notifications is described fully on a separate page:

Processing Notifications

Generating traps is only half of the battle. We also need something to receive the notification, and respond accordingly. The Net-SNMP suite includes an application snmptrapd which can accept and process such notifications.

By default, it will simply log all incoming notifications via syslog. The two snmptrap commands above would be logged as:

 1999-11-12 23:26:07 localhost [127.0.0.1] UCD-TRAP-TEST-MIB::demotraps:
       Enterprise Specific Trap (demoTrap) Uptime: 1 day, 5:34:06
       SNMPv2-MIB::sysLocation.0 = "Just here"

and

 1999-11-13 08:31:33 localhost [127.0.0.1]:
       SNMPv2-MIB::sysUpTime.0 = Timeticks: (13917129) 1 day, 14:39:31.29
       SNMPv2-MIB::snmpTrapOID.0 = OID: UCD-NOTIFICATION-TEST-MIB::demoNotif
       SNMPv2-MIB::sysLocation.0 = "just here" 

respectively.

Trap Handlers

The snmptrapd utility also has the ability to execute other programs on the reception of a trap. This is controlled by the traphandle directive, with the syntax

 traphandle OID command

Notice, that this only takes an OID to determine which trap (or notification) is received. This means that SNMPv1 traps, which have a trap type and specific type, need to be represented in SNMPv2 format, which is described in RFC 2089.

Matching SNMPv1 OIDs

SNMPv1 traps fall into two broad categories: generic and enterprise specific. Generic traps use trap types 0 through 5, and do not use the specific type. To match a generic trap, the traphandle OID should be the SNMPv2-MIB::snmpTraps OID, with an additional final OID of the trap type + 1. For example, to match linkDown traps (specific type 2), the correct OID would be "1.3.6.1.6.3.1.1.5.3" (or SNMPv2-MIB::snmpTraps.3, which is also IF-MIB::linkDown).

When the specific type is 6, the trap is an enterprise specific trap. When matching these traps, the traphandle OID is constructed using the enterprise OID and specific type specified in the trap. Earlier in the tutorial, we sent a SNMPv1 enterprise specific trap with an enterprise OID of UCD-TRAP-TEST-MIB::demotraps, a trap type of 6 and a specific type of 17. To match this trap type, the traphandle OID should be the enterprise OID, plus 0, plus the specific type. So the correct OID would be ".1.3.6.1.4.1.2021.13.990.0.17" (or UCD-TRAP-TEST-MIB::demoTrap).

Matching SNMPv2 OIDs

SNMPv2 traps and informs are much easier, because they include the correct OID in the SNMPv2-MIB::snmpTrapOID.0 variable in the trap.

-- ************************************************************************** -- -- $Id: MBG-LANTIME-MIB.mib 1.3 2006/08/24 13:07:55 heiko TRASH $ -- $Name: $ -- -- Copyright (c) Meinberg Funkuhren, 31812 Bad Pyrmont, Germany -- -- Description: -- Management Information Base for Meinberg LANTIME time server -- -- ************************************************************************** -- -- $Log: MBG-LANTIME-MIB.mib $ -- Revision 1.3 2006/08/24 13:07:55 heiko -- - now up to 7 external NTP servers -- - "prefer" flag can be set for each external NTP server -- - renumbered the remaining objects in mbgLtCfgNtp -- Revision 1.2 2006/08/23 09:51:05 heiko -- - new object mbgLtCmdSetRefTime for setting the time of the refclock via SNMP -- Revision 1.1 2006/08/23 09:35:41 heiko -- -- **************************************************************************

MBG-SNMP-MIB DEFINITIONS ::= BEGIN


IMPORTS

   MODULE-IDENTITY, OBJECT-TYPE , Integer32, NOTIFICATION-TYPE, enterprises
                                                               FROM SNMPv2-SMI
   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
                                                               FROM SNMPv2-CONF
   DisplayString                                       FROM SNMPv2-TC;

mbgSnmp MODULE-IDENTITY

   LAST-UPDATED "200608230000Z"
   ORGANIZATION "www.meinberg.de"
   CONTACT-INFO
        "postal:   Meinberg Funkuhren
                   Lange Wand 9
                   31812 Bad Pyrmont
                   Germany
         email:    info@meinberg.de"
   DESCRIPTION
       " Management Information Base for Meinberg LANTIME time server"
   REVISION     "200806150000Z"
   DESCRIPTION
       "Revised edition (V5.25), changed postal address"
    REVISION     "200608230000Z"
   DESCRIPTION
       "Revised edition (V4.38), added mbgLtCmdSetRefTime"
   REVISION     "200603200000Z"
   DESCRIPTION
       "Revised edition (V4.36) with changed Trap OID base"
   REVISION     "200507080000Z"
   DESCRIPTION
       "Revised edition (V4.25)"
   ::= { enterprises 5597}

mbgLantime OBJECT IDENTIFIER  ::= { mbgSnmp 3 }

-- -- General LANTIME information objects --

mbgLtInfo OBJECT IDENTIFIER ::= { mbgLantime 0 }

mbgLtFirmwareVersion OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "shows the installed firmware version of your LANTIME"
   ::= { mbgLtInfo  1 }

mbgLtFirmwareVersionVal OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "shows the installed firmware version of your LANTIME as an Integer32 value"
   ::= { mbgLtInfo 2 }


-- -- Lantime NTP states -- mbgLtNtp OBJECT IDENTIFIER  ::= { mbgLantime 1 }


mbgLtNtpCurrentState OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "actual state of the NTP as string"
   --- possible strings:
   --- "not synchronized"
   --- "no good refclock (->local)"
   --- "sync to external refclock"
   --- "sync to serial refclock"
   --- "Normal Operation (->PPS)"
   --- "Normal Operation (->internal refclock)"
   ---     internal refclocks (PlugIn cards) have to be linked
   ---     via /dev/refclock-2 and /dev/refclock-3
   ::= { mbgLtNtp 1 }

mbgLtNtpCurrentStateVal OBJECT-TYPE

   SYNTAX      INTEGER {
                           notSynchronized(0),
                           noGoodRefclock(1),
                           syncToExtRefclock(2),
                           syncToSerialRefclock(3),
                           normalOperationPPS(4),
                           normalOperationRefclock(5),
                           unknown(99)
                       }
   
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current state of the NTP as integer value"
   --- "0 : not synchronized"
   --- "1 : no good refclock (->local)"
   --- "2 : sync to external refclock"
   --- "3 : sync to serial refclock"
   --- "4 : Normal Operation (->PPS)"
   --- "5 : Normal Operation (->internal refclock)"
   DEFVAL { 99 }
   ::= { mbgLtNtp 2 }

mbgLtNtpStratum OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Stratum value of the NTP "
   DEFVAL { 99 }
   ::= { mbgLtNtp 3 }

mbgLtNtpActiveRefclockId OBJECT-TYPE

   SYNTAX      INTEGER {
               localClock(0),
               serialRefclock(1),
               pps(2),
               externalRefclock(3),
               notSync(99)
               }
               
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Index of the current refclock selected by the NTP "
   --- "0 : local clock"
   --- "1 : serial refclock
   --- "2 : PPS (Lantime/RD: second serial refclock"
   --- "3 : external Refclock (Lantime/RD: PPS)
   --- "99: NTP has not sync to any refclock" 
   DEFVAL { 99 }
   ::= { mbgLtNtp 4 }

mbgLtNtpActiveRefclockName OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Name of the current refclock selected by the NTP "
   ::= { mbgLtNtp 5 }

mbgLtNtpActiveRefclockOffset OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Time offset between the current selected refclock and time of NTP as string"
   ::= { mbgLtNtp 6 }

mbgLtNtpActiveRefclockOffsetVal OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Time offset in micro seconds between the current selected refclock and time of NTP "
   DEFVAL { 1024000000 }
   ::= { mbgLtNtp 7 }

mbgLtNtpNumberOfRefclocks OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Number of refclocks configured in the NTP "
   DEFVAL { 0 }
   ::= { mbgLtNtp 8 }

mbgLtNtpAuthKeyId OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Authentication Key ID of active refclock is active "
   DEFVAL { 0 }
   ::= { mbgLtNtp 9 }

mbgLtNtpVersion OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "integrated NTP version "
   ::= { mbgLtNtp 10 }


-- -- Lantime Refclock states --

mbgLtRefclock OBJECT IDENTIFIER  ::= { mbgLantime 2 }

mbgLtRefClockType OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Type of refclock connected to NTP time server "
   ::= { mbgLtRefclock 1 }

mbgLtRefClockTypeVal OBJECT-TYPE

   SYNTAX      INTEGER {
               notavailable(0),
               mbgGPS167(1),
               mbgGPS167BGTTGP(2),
               mbgPZF509(3),
               mbgPZF509BGTTGP(4),
               mbgSHS(5),
               mbgSHSBGT(6),
               mbgSHSFRC(7),
               mbgSHSFRCBGT(8),
               mbgTCR509(9),
               mbgTCR509BGTTGP(10),
               mbgRDT(11),
               mbgRDTBGTTGP(12),
               mbgEDT(13),
               mbgEDTBGTTGP(14),
               mbgAHS(15),
               mbgDHS(16),
               mbgNDT167(17),
               mbgNDT167BGT(18),
               mbgDCT(19),
               mbgDCTBGT(20),
               mbgSHSTCR(21),
               mbgSHSTCRBGT(22)
               }
               
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Type of refclock connected to NTP time server as value"
   --- " 0: not available"
   --- " 1: GPS167 1HE"
   --- " 2: GPS167 BGT/TGP"
   --- " 3: PZF509 1HE"
   --- " 4: PZF509 BGT/TGP"
   --- " 5: SHS 1HE"
   --- " 6: SHS BGT"
   --- " 7: SHS-FRC 1HE"
   --- " 8: SHS-FRC BGT"
   --- " 9: TCR509 1HE"
   --- "10: TCR509 BGT/TGP"
   --- "11: RDT 1HE"
   --- "12: RDT BGT/TGP"
   --- "13: EDT 1HE"
   --- "14: EDT BGT/TGP"
   --- "15: AHS"
   --- "16: DHS"
   --- "17: NDT167 1HE"
   --- "18: NDT167 BGT"
   --- "19: DCT 1HE"
   --- "20: DCT BGT"
   --- "21: SHS-TCR 1HE"
   --- "22: SHS-TCR BGT"


   DEFVAL { 0 }
   ::= { mbgLtRefclock 2 }


mbgLtRefClockMode OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current mode of refclock connected to NTP time server "
   ::= { mbgLtRefclock 3 }

mbgLtRefClockModeVal OBJECT-TYPE

   SYNTAX      INTEGER {
                       notavailable(0),
                       normalOperation(1),
                       trackingSearching(2),
                       antennaFaulty(3),
                       warmBoot(4),
                       coldBoot(5),
                       antennaShortcircuit(6)
               }
                       
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current mode of refclock connected to NTP time server as value"
   --- " 0: not available"
   --- " 1: Normal Operation"
   --- " 2: Tracking/Searching"
   --- " 3: Antenna Faulty"
   --- " 4: Warm Boot"
   --- " 5: Cold Boot"
   --- " 6: Antenna Short Circuit"
   DEFVAL { 0 }
   ::= { mbgLtRefclock 4 }

mbgLtRefGpsState OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current State of GPS refclock conneted to NTP time server "
   ::= { mbgLtRefclock 5 }

mbgLtRefGpsStateVal OBJECT-TYPE

   SYNTAX      INTEGER {
               notavailable(0),
               synchronized(1),
               notsynchronized(2)
               }
               
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current State of GPS refclock conneted to NTP time server as value"
   --- " 0: not available"
   --- " 1: synchronized"
   --- " 2: not synchronized"
   DEFVAL { 0 }
   ::= { mbgLtRefclock 6 }

mbgLtRefGpsPosition OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Position of GPS refclock conneted to NTP time server "
   ::= { mbgLtRefclock 7 }

mbgLtRefGpsSatellites OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Satellites in view and good of GPS refclock connected to NTP time server "
   ::= { mbgLtRefclock 8 }

mbgLtRefGpsSatellitesGood OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current good Satellites of GPS refclock connected to NTP time server as value"
   ::= { mbgLtRefclock 9 }

mbgLtRefGpsSatellitesInView OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Satellites in view of GPS refclock conneted to NTP time server as value"
   ::= { mbgLtRefclock 10 }

mbgLtRefPzfState OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current State of DCF77/PZF refclock connected to NTP time server "
   ::= { mbgLtRefclock 11 }

mbgLtRefPzfStateVal OBJECT-TYPE

   SYNTAX      INTEGER {
               notavailable(0),
               sync(1),
               notsyncnow(2),
               neversynced(3)
               }
               
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current State of DCF77/PZF refclock connected to NTP time server as value"
   --- " 0: not available"
   --- " 1: sync"
   --- " 2: not sync now"
   --- " 3: never synced"
   DEFVAL { 0 }
   ::= { mbgLtRefclock 12 }

mbgLtRefPzfKorrelation OBJECT-TYPE

   SYNTAX      Integer32 (0..255)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Korrelation of DCF77/PZF refclock connected to NTP time server "
   --- "   0: not available"
   --- " 254: Antenna Faulty"
   --- " 255: Gsync"
   --- " minimum of 60 to get synchronization"
   --- " optimal value of 75"
   DEFVAL { 0 }
   ::= { mbgLtRefclock 13 }

mbgLtRefPzfField OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current strength of field of DCF77/PZF refclock connected to NTP time server "
   --- " 0: not available"
   DEFVAL { 0 }
   ::= { mbgLtRefclock 14 }


mbgLtRefGpsMode OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Mode of GPS refclock connected to NTP time server "
   ::= { mbgLtRefclock 15 }

mbgLtRefGpsModeVal OBJECT-TYPE

   SYNTAX      INTEGER {
               notavailable(0),
               normalOperation(1),
               trackingSearching(2),
               antennaFaulty(3),
               warmBoot(4),
               coldBoot(5),
               antennaShortcircuit(6)
               }
               
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Mode of GPS refclock connected to NTP time server as value"
   --- " 0: not available"
   --- " 1: Normal Operation"
   --- " 2: Tracking/Searching"
   --- " 3: Antenna Faulty"
   --- " 4: Warm Boot"
   --- " 5: Cold Boot"
   --- " 6: Antenna Short Circuit"
   --- This variable was formerly known as mbgLtRefClockModeVal
   DEFVAL { 0 }
   ::= { mbgLtRefclock 16 }

mbgLtRefIrigMode OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Mode of IRIG refclock conneted to NTP time server "
   ::= { mbgLtRefclock 17 }

mbgLtRefIrigModeVal OBJECT-TYPE

   SYNTAX      INTEGER {
               notavailable(0),
               locked(1),
               notlocked(2),
               telegramError(3)
               }
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Mode of IRIG refclock conneted to NTP time server as value"
   --- " 0: not available"
   --- " 1: Sync (locked)"
   --- " 2: Not sync (not locked)"
   --- " 3: Telegram error"
   DEFVAL { 0 }
   ::= { mbgLtRefclock 18 }


mbgLtRefPzfMode OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Mode of PZF refclock connected to NTP time server "
   ::= { mbgLtRefclock 19 }

mbgLtRefPzfModeVal OBJECT-TYPE

   SYNTAX      INTEGER {
               notavailable(0),
               normalOperation(1),
               antennaFaulty(2)
               }
               
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Mode of PZF refclock connected to NTP time server as value"
   --- " 0: not available"
   --- " 1: Normal Operation"
   --- " 2: Antenna Faulty"
   DEFVAL { 0 }
   ::= { mbgLtRefclock 20 }


mbgLtRefIrigState OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current State of IRIG refclock connected to NTP time server "
   ::= { mbgLtRefclock 21 }

mbgLtRefIrigStateVal OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current State of IRIG refclock connected to NTP time server as value"
   --- Please refer to manual for IRIG states. They are represented by set/unset bits,
   --- so this value is a "binary" form combining all possible IRIG states of our IRIG refclock
   DEFVAL { 0 }
   ::= { mbgLtRefclock 22 }

mbgLtRefSHSMode OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Mode of SHS system connected to NTP time server "
   ::= { mbgLtRefclock 23 }

mbgLtRefSHSModeVal OBJECT-TYPE

   SYNTAX      INTEGER {
               notavailable(0),
               normalOperation(1),
               stoppedTimeLimitError(2)
               }
               
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Mode of SHS system connected to NTP time server as value"
   --- " 0: not available"
   --- " 1: Normal Operation"
   --- " 2: Stopped/Time Limit Error"
   DEFVAL { 0 }
   ::= { mbgLtRefclock 24 }

mbgLtRefSHSTimeDiff OBJECT-TYPE

   SYNTAX     Integer32 (-2147483648..2147483647)
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
       "current time difference between the two SHS reference time sources in miliseconds"
   DEFVAL { 0 }
   ::= { mbgLtRefclock 25 }

mbgLtRefDctState OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current State of DCF77 refclock connected to NTP time server "
   ::= { mbgLtRefclock 26 }

mbgLtRefDctStateVal OBJECT-TYPE

   SYNTAX      INTEGER {
               notavailable(0),
               sync(1),
               notsyncnow(2),
               neversynced(3)
               }
               
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current State of DCF77 refclock connected to NTP time server as value"
   --- " 0: not available"
   --- " 1: sync"
   --- " 2: not sync now"
   --- " 3: never synced"
   DEFVAL { 0 }
   ::= { mbgLtRefclock 27 }

mbgLtRefDctField OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current strength of field of DCF77 refclock connected to NTP time server "
   --- " 0: not available"
   DEFVAL { "0" }
   ::= { mbgLtRefclock 28 }

mbgLtRefDctMode OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Mode of DCF77 refclock connected to NTP time server "
   ::= { mbgLtRefclock 29 }

mbgLtRefDctModeVal OBJECT-TYPE

   SYNTAX      INTEGER {
               notavailable(0),
               normalOperation(1),
               antennaFaulty(2)
               }
               
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "current Mode of DCF77 refclock connected to NTP time server as value"
   --- " 0: not available"
   --- " 1: Normal Operation"
   --- " 2: Antenna Faulty"
   DEFVAL { 0 }
   ::= { mbgLtRefclock 30 }

-- -- Lantime SNMP trap definitions --

mbgLtNotifications OBJECT IDENTIFIER  ::= { mbgLantime 3 } mbgLtTraps OBJECT IDENTIFIER  ::= { mbgLtNotifications 0 }


mbgLtTrapNTPNotSync NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when NTP is not synchronised "
   ::= { mbgLtTraps 1 }

mbgLtTrapNTPStopped NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when NTP is stopped "
   ::= { mbgLtTraps 2 }

mbgLtTrapServerBoot NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when time server has finished boot sequence "
   ::= { mbgLtTraps 3 }

mbgLtTrapReceiverNotResponding NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when receiver is not responding "
   ::= { mbgLtTraps 4 }

mbgLtTrapReceiverNotSync NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when receiver is not synchronised "
   ::= { mbgLtTraps 5 }

mbgLtTrapAntennaFaulty NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when connection to antenna is broken "
   ::= { mbgLtTraps 6 }

mbgLtTrapAntennaReconnect NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when antenna has been reconnected "
   ::= { mbgLtTraps 7 }

mbgLtTrapConfigChanged NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when timeserver reloaded its configuration "
   ::= { mbgLtTraps 8 }

mbgLtTrapLeapSecondAnnounced NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when a leap second has been announced "
   ::= { mbgLtTraps 9 }

mbgLtTrapSHSTimeLimitError NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when SHS timelimit exceeded "
   ::= { mbgLtTraps 10 }

mbgLtTrapSecondaryRecNotSync NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when secondary receiver in SHS system is not synchronised "
   ::= { mbgLtTraps 11 }

mbgLtTrapPowerSupplyFailure NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when one of the redundant power supplies fails"
   ::= { mbgLtTraps 12 }

mbgLtTrapAntennaShortCircuit NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when a connected antenna fails due to a short circuit"
   ::= { mbgLtTraps 13 }

mbgLtTrapNormalOperation NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when the system returned to a healthy state "
   ::= { mbgLtTraps 77 }

mbgLtTrapHeartbeat NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent periodically to indicate that time server is still alive "
   ::= { mbgLtTraps 88 }

mbgLtTrapTestNotification NOTIFICATION-TYPE

   STATUS      current
   DESCRIPTION
       "trap to be sent when a test notification has been requested "
   ::= { mbgLtTraps 99 }

mbgLtTrapMessage OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-only
       STATUS          current
       DESCRIPTION
               "used as a payload object for all traps, holds a clear text event message"
       DEFVAL { "no event" }
       ::= { mbgLtTraps 100 }

-- -- Meinberg Lantime CFG MIB objects for agent module --


mbgLtCfg OBJECT IDENTIFIER  ::= { mbgLantime 4 }

-- -- Network parameters --


mbgLtCfgNetwork OBJECT IDENTIFIER ::= { mbgLtCfg 1 }

mbgLtCfgHostname OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "The hostname configured for this LANTIME"
   ::= { mbgLtCfgNetwork 1 }

mbgLtCfgDomainname OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "The domainname configured for this LANTIME"
   ::= { mbgLtCfgNetwork 2 }


mbgLtCfgNameserver1 OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "The first nameserver used by this LANTIME"
   ::= { mbgLtCfgNetwork 3 }

mbgLtCfgNameserver2 OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "The second nameserver used this LANTIME"
   ::= { mbgLtCfgNetwork 4 }

mbgLtCfgSyslogserver1 OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "The first syslog server we are sending log entries to"
   ::= { mbgLtCfgNetwork 5 }

mbgLtCfgSyslogserver2 OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "The second syslog server we are sending log entries to"
   ::= { mbgLtCfgNetwork 6 }

mbgLtCfgTelnetAccess OBJECT-TYPE

   SYNTAX      INTEGER         { 
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS                      current
   DESCRIPTION
       "Is telnet administration enabled"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNetwork 7 }

mbgLtCfgFTPAccess OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is FTP administration enabled"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNetwork 8 }

mbgLtCfgHTTPAccess OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is web based administration enabled"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNetwork 9 }

mbgLtCfgHTTPSAccess OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is secure web based administration enabled"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNetwork 10 }

mbgLtCfgSNMPAccess OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is SNMP administration enabled"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNetwork 11 }

mbgLtCfgSambaAccess OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is Samba administration enabled"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNetwork 12 }

mbgLtCfgIPv6Access OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is IPv6 support enabled"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNetwork 13 }

mbgLtCfgSSHAccess OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is SSH administration enabled"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNetwork 14 }



-- -- NTP parameters --


mbgLtCfgNTP OBJECT IDENTIFIER ::= { mbgLtCfg 2 }


mbgLtCfgNTPServer1 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 1 } mbgLtCfgNTPServer2 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 2 } mbgLtCfgNTPServer3 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 3 } mbgLtCfgNTPServer4 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 4 } mbgLtCfgNTPServer5 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 5 } mbgLtCfgNTPServer6 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 6 } mbgLtCfgNTPServer7 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 7 }

mbgLtCfgNTPServer1IP OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "IP address for external NTP server"
   ::= { mbgLtCfgNTPServer1 1 }

mbgLtCfgNTPServer1Key OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Key for external NTP server"
   ::= { mbgLtCfgNTPServer1 2 }

mbgLtCfgNTPServer1Autokey OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is autokey enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer1 3 }

mbgLtCfgNTPServer1Prefer OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is the preferred flag enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer1 4 }


mbgLtCfgNTPServer2IP OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "IP address for external NTP server"
   ::= { mbgLtCfgNTPServer2 1 }

mbgLtCfgNTPServer2Key OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Key for external NTP server"
   ::= { mbgLtCfgNTPServer2 2 }

mbgLtCfgNTPServer2Autokey OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is autokey enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer2 3 }

mbgLtCfgNTPServer2Prefer OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is the preferred flag enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer2 4 }



mbgLtCfgNTPServer3IP OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "IP address for external NTP server"
   ::= { mbgLtCfgNTPServer3 1 }

mbgLtCfgNTPServer3Key OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Key for external NTP server"
   ::= { mbgLtCfgNTPServer3 2 }

mbgLtCfgNTPServer3Autokey OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is autokey enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer3 3 }

mbgLtCfgNTPServer3Prefer OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is the preferred flag enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer3 4 }



mbgLtCfgNTPServer4IP OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "IP address for external NTP server"
   ::= { mbgLtCfgNTPServer4 1 }

mbgLtCfgNTPServer4Key OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Key for external NTP server"
   ::= { mbgLtCfgNTPServer4 2 }

mbgLtCfgNTPServer4Autokey OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is autokey enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer4 3 }

mbgLtCfgNTPServer4Prefer OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is the preferred flag enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer4 4 }


mbgLtCfgNTPServer5IP OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "IP address for external NTP server"
   ::= { mbgLtCfgNTPServer5 1 }

mbgLtCfgNTPServer5Key OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Key for external NTP server"
   ::= { mbgLtCfgNTPServer5 2 }

mbgLtCfgNTPServer5Autokey OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is autokey enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer5 3 }

mbgLtCfgNTPServer5Prefer OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is the preferred flag enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer5 4 }



mbgLtCfgNTPServer6IP OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "IP address for external NTP server"
   ::= { mbgLtCfgNTPServer6 1 }

mbgLtCfgNTPServer6Key OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Key for external NTP server"
   ::= { mbgLtCfgNTPServer6 2 }

mbgLtCfgNTPServer6Autokey OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is autokey enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer6 3 }

mbgLtCfgNTPServer6Prefer OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is the preferred flag enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer6 4 }


mbgLtCfgNTPServer7IP OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "IP address for external NTP server"
   ::= { mbgLtCfgNTPServer7 1 }

mbgLtCfgNTPServer7Key OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Key for external NTP server"
   ::= { mbgLtCfgNTPServer7 2 }

mbgLtCfgNTPServer7Autokey OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is autokey enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer7 3 }

mbgLtCfgNTPServer7Prefer OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is the preferred flag enabled for the external NTP server"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTPServer7 4 }



mbgLtCfgNTPStratumLocalClock OBJECT-TYPE

   SYNTAX      Integer32 (0..15)
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "The stratum value assigned to the local clock of the timeserver"
   ::= { mbgLtCfgNTP 8 }


mbgLtCfgNTPTrustedKey OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "The key used for the internal refclock of the timeserver"
   ::= { mbgLtCfgNTP 9 }

mbgLtCfgNTPBroadcastIP OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "NTP broadcast IP address"
   ::= { mbgLtCfgNTP 10 }

mbgLtCfgNTPBroadcastKey OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Key used for NTP broadcasts"
   ::= { mbgLtCfgNTP 11 }


mbgLtCfgNTPBroadcastAutokey OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is autokey generation used for NTP broadcasts"
   ::= { mbgLtCfgNTP 12 }


mbgLtCfgNTPAutokeyFeature OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is the NTP autokey feature enabled"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTP 13 }


mbgLtCfgNTPAtomPPS OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is the NTP atom pps feature enabled"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgNTP 14 }



-- -- EMail parameters --


mbgLtCfgEMail OBJECT IDENTIFIER ::= { mbgLtCfg 3 }

mbgLtCfgEMailTo OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "EMail address to send alerts etc. to (receiving address)"
   ::= { mbgLtCfgEMail 1 }

mbgLtCfgEMailFrom OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "EMail address to send alerts etc. from (sending address)"
   ::= { mbgLtCfgEMail 2 }

mbgLtCfgEMailSmarthost OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "SMTP smarthost used to send mail"
   ::= { mbgLtCfgEMail 3 }


-- -- SNMP parameters --


mbgLtCfgSNMP OBJECT IDENTIFIER ::= { mbgLtCfg 4 }

mbgLtCfgSNMPTrapReceiver1 OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "First SNMP trap receiver host"
   ::= { mbgLtCfgSNMP 1 }

mbgLtCfgSNMPTrapReceiver2 OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Second SNMP trap receiver host"
   ::= { mbgLtCfgSNMP 2 }

mbgLtCfgSNMPTrapRec1Community OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "First SNMP trap receiver community"
   ::= { mbgLtCfgSNMP 3 }

mbgLtCfgSNMPTrapRec2Community OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Second SNMP trap receiver community"
   ::= { mbgLtCfgSNMP 4 }


mbgLtCfgSNMPReadOnlyCommunity OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "SNMP community string for read-only access"
   ::= { mbgLtCfgSNMP 5 }


mbgLtCfgSNMPReadWriteCommunity OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "SNMP community string for read-write access"
   ::= { mbgLtCfgSNMP 6 }


mbgLtCfgSNMPContact OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "SNMP contact string for Lantime"
   ::= { mbgLtCfgSNMP 7 }


mbgLtCfgSNMPLocation OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "SNMP location string for Lantime"
   ::= { mbgLtCfgSNMP 8 }


-- -- Winpopup parameters --

mbgLtCfgWinpopup OBJECT IDENTIFIER ::= { mbgLtCfg 5 }

mbgLtCfgWMailAddress1 OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "First windows popup alert receiver"
   ::= { mbgLtCfgWinpopup 1 }

mbgLtCfgWMailAddress2 OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Second windows popup alert receiver"
   ::= { mbgLtCfgWinpopup 2 }


-- -- Wallmount display parameters --


mbgLtCfgWalldisplay OBJECT IDENTIFIER ::= { mbgLtCfg 6 }

mbgLtCfgVP100Display1IP OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "IP address of first VP100 wall display"
   ::= { mbgLtCfgWalldisplay 1 }

mbgLtCfgVP100Display1SN OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Serial number of first VP100 wall display"
   ::= { mbgLtCfgWalldisplay 2 }

mbgLtCfgVP100Display2IP OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "IP address of second VP100 wall display"
   ::= { mbgLtCfgWalldisplay 3 }

mbgLtCfgVP100Display2SN OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Serial number of second VP100 wall display"
   ::= { mbgLtCfgWalldisplay 4 }



-- -- Notify parameters --


mbgLtCfgNotify OBJECT IDENTIFIER  ::= { mbgLtCfg 7 }

mbgLtCfgNotifyNTPNotSync OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Which alerts are sent in case of a NTP_not_sync event"
   --- possible strings:
   --- "email (sending an e-mail)"
   --- "wmail (sending a win popup message)"
   --- "snmp (sending a SNMP trap)"
   --- "disp (showing an alert on wall display)"
   --- "or a comma separated combination of these"
   --- "An empty string disables notification for this event."
   --- "Example: wmail,email (sending a win popup and e-mail message)"
   ::= { mbgLtCfgNotify 1 }

mbgLtCfgNotifyNTPStopped OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Which alerts are sent in case of a NTP_stopped event"
   --- possible strings:
   --- "email (sending an e-mail)"
   --- "wmail (sending a win popup message)"
   --- "snmp (sending a SNMP trap)"
   --- "disp (showing an alert on wall display)"
   --- "or a comma separated combination of these"
   --- "An empty string disables notification for this event."
   --- "Example: wmail,email (sending a win popup and e-mail message)"
   ::= { mbgLtCfgNotify 2 }

mbgLtCfgNotifyServerBoot OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Which alerts are sent in case of a server_boot event"
   --- possible strings:
   --- "email (sending an e-mail)"
   --- "wmail (sending a win popup message)"
   --- "snmp (sending a SNMP trap)"
   --- "disp (showing an alert on wall display)"
   --- "or a comma separated combination of these"
   --- "An empty string disables notification for this event."
   --- "Example: wmail,email (sending a win popup and e-mail message)"
   ::= { mbgLtCfgNotify 3 }

mbgLtCfgNotifyRefclkNoResponse OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Which alerts are sent in case of a refclock_not_responding event"
   --- possible strings:
   --- "email (sending an e-mail)"
   --- "wmail (sending a win popup message)"
   --- "snmp (sending a SNMP trap)"
   --- "disp (showing an alert on wall display)"
   --- "or a comma separated combination of these"
   --- "An empty string disables notification for this event."
   --- "Example: wmail,email (sending a win popup and e-mail message)"
   ::= { mbgLtCfgNotify 4 }

mbgLtCfgNotifyRefclockNotSync OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Which alerts are sent in case of a refclock_not_sync event"
   --- possible strings:
   --- "email (sending an e-mail)"
   --- "wmail (sending a win popup message)"
   --- "snmp (sending a SNMP trap)"
   --- "disp (showing an alert on wall display)"
   --- "or a comma separated combination of these"
   --- "An empty string disables notification for this event."
   --- "Example: wmail,email (sending a win popup and e-mail message)"
   ::= { mbgLtCfgNotify 5 }

mbgLtCfgNotifyAntennaFaulty OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Which alerts are sent in case of an antenna_faulty event"
   --- possible strings:
   --- "email (sending an e-mail)"
   --- "wmail (sending a win popup message)"
   --- "snmp (sending a SNMP trap)"
   --- "disp (showing an alert on wall display)"
   --- "or a comma separated combination of these"
   --- "An empty string disables notification for this event."
   --- "Example: wmail,email (sending a win popup and e-mail message)"
   ::= { mbgLtCfgNotify 6 }

mbgLtCfgNotifyAntennaReconnect OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Which alerts are sent in case of an antenna_reconnect event"
   --- possible strings:
   --- "email (sending an e-mail)"
   --- "wmail (sending a win popup message)"
   --- "snmp (sending a SNMP trap)"
   --- "disp (showing an alert on wall display)"
   --- "or a comma separated combination of these"
   --- "An empty string disables notification for this event."
   --- "Example: wmail,email (sending a win popup and e-mail message)"
   ::= { mbgLtCfgNotify 7 }

mbgLtCfgNotifyConfigChanged OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Which alerts are sent in case of a config_changed event"
   --- possible strings:
   --- "email (sending an e-mail)"
   --- "wmail (sending a win popup message)"
   --- "snmp (sending a SNMP trap)"
   --- "disp (showing an alert on wall display)"
   --- "or a comma separated combination of these"
   --- "An empty string disables notification for this event."
   --- "Example: wmail,email (sending a win popup and e-mail message)"
   ::= { mbgLtCfgNotify 8 }

mbgLtCfgNotifySHSTimeLimitError OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Which alerts are sent in case of a SHS_timelimiterror event"
   --- possible strings:
   --- "email (sending an e-mail)"
   --- "wmail (sending a win popup message)"
   --- "snmp (sending a SNMP trap)"
   --- "disp (showing an alert on wall display)"
   --- "or a comma separated combination of these."
   --- "An empty string disables notification for this event."
   --- "Example: wmail,email (sending a win popup and e-mail message)"
   ::= { mbgLtCfgNotify 9 }


mbgLtCfgNotifyLeapSecond OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Which alerts are sent in case of a Leap_Second_Announced event"
   --- possible strings:
   --- "email (sending an e-mail)"
   --- "wmail (sending a win popup message)"
   --- "snmp (sending a SNMP trap)"
   --- "disp (showing an alert on wall display)"
   --- "or a comma separated combination of these."
   --- "An empty string disables notification for this event."
   --- "Example: wmail,email (sending a win popup and e-mail message)"
   ::= { mbgLtCfgNotify 10 }




-- -- Ethernet parameters --


mbgLtCfgEthernet OBJECT IDENTIFIER ::= { mbgLtCfg 8 }

mbgLtCfgEthernetIf0 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 0 } mbgLtCfgEthernetIf1 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 1 } mbgLtCfgEthernetIf2 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 2 } mbgLtCfgEthernetIf3 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 3 } mbgLtCfgEthernetIf4 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 4 } mbgLtCfgEthernetIf5 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 5 } mbgLtCfgEthernetIf6 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 6 } mbgLtCfgEthernetIf7 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 7 } mbgLtCfgEthernetIf8 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 8 } mbgLtCfgEthernetIf9 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 9 }



mbgLtCfgEthernetIf0IPv4IP OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 address of the first ethernet interface"
       ::= { mbgLtCfgEthernetIf0 1 }

mbgLtCfgEthernetIf0IPv4Netmask OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 netmask of the first ethernet interface"
       ::= { mbgLtCfgEthernetIf0 2 }

mbgLtCfgEthernetIf0IPv4Gateway OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 gateway address of the first ethernet interface"
       ::= { mbgLtCfgEthernetIf0 3 }


mbgLtCfgEthernetIf0DHCPClient OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is DHCP used to get IP parameters for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf0 4 }

mbgLtCfgEthernetIf0IPv6IP1 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The first IPv6 address of the first ethernet interface"
       ::= { mbgLtCfgEthernetIf0 5 }

mbgLtCfgEthernetIf0IPv6IP2 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The second IPv6 address of the first ethernet interface"
       ::= { mbgLtCfgEthernetIf0 6 }

mbgLtCfgEthernetIf0IPv6IP3 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The third IPv6 address of the first ethernet interface"
       ::= { mbgLtCfgEthernetIf0 7 }

mbgLtCfgEthernetIf0IPv6Autoconf OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is IPv6 Autoconf used for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf0 8 }

mbgLtCfgEthernetIf0NetLinkMode OBJECT-TYPE

       SYNTAX  INTEGER {
                       autosensing(0),
                       link10half(1),
                       link10full(2),
                       link100half(3),
                       link100full(4)
                       }
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "Link mode for this interface"
       ::= { mbgLtCfgEthernetIf0 9 }


mbgLtCfgEthernetIf1IPv4IP OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 address of the second ethernet interface"
       ::= { mbgLtCfgEthernetIf1 1 }

mbgLtCfgEthernetIf1IPv4Netmask OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 netmask of the second ethernet interface"
       ::= { mbgLtCfgEthernetIf1 2 }

mbgLtCfgEthernetIf1IPv4Gateway OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 gateway address of the second ethernet interface"
       ::= { mbgLtCfgEthernetIf1 3 }


mbgLtCfgEthernetIf1DHCPClient OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is DHCP used to get IP parameters for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf1 4 }

mbgLtCfgEthernetIf1IPv6IP1 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The first IPv6 address of the second ethernet interface"
       ::= { mbgLtCfgEthernetIf1 5 }

mbgLtCfgEthernetIf1IPv6IP2 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The second IPv6 address of the second ethernet interface"
       ::= { mbgLtCfgEthernetIf1 6 }

mbgLtCfgEthernetIf1IPv6IP3 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The third IPv6 address of the second ethernet interface"
       ::= { mbgLtCfgEthernetIf1 7 }

mbgLtCfgEthernetIf1IPv6Autoconf OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is IPv6 Autoconf used for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf1 8 }

mbgLtCfgEthernetIf1NetLinkMode OBJECT-TYPE

       SYNTAX  INTEGER {
                       autosensing(0),
                       link10half(1),
                       link10full(2),
                       link100half(3),
                       link100full(4)
                       }
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "Link mode for this interface"
       ::= { mbgLtCfgEthernetIf1 9 }


mbgLtCfgEthernetIf2IPv4IP OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 address of the third ethernet interface"
       ::= { mbgLtCfgEthernetIf2 1 }

mbgLtCfgEthernetIf2IPv4Netmask OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 netmask of the third ethernet interface"
       ::= { mbgLtCfgEthernetIf2 2 }

mbgLtCfgEthernetIf2IPv4Gateway OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 gateway address of the third ethernet interface"
       ::= { mbgLtCfgEthernetIf2 3 }


mbgLtCfgEthernetIf2DHCPClient OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is DHCP used to get IP parameters for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf2 4 }

mbgLtCfgEthernetIf2IPv6IP1 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The first IPv6 address of the third ethernet interface"
       ::= { mbgLtCfgEthernetIf2 5 }

mbgLtCfgEthernetIf2IPv6IP2 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The second IPv6 address of the third ethernet interface"
       ::= { mbgLtCfgEthernetIf2 6 }

mbgLtCfgEthernetIf2IPv6IP3 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The third IPv6 address of the third ethernet interface"
       ::= { mbgLtCfgEthernetIf2 7 }

mbgLtCfgEthernetIf2IPv6Autoconf OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is IPv6 Autoconf used for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf2 8 }

mbgLtCfgEthernetIf2NetLinkMode OBJECT-TYPE

       SYNTAX  INTEGER {
                       autosensing(0),
                       link10half(1),
                       link10full(2),
                       link100half(3),
                       link100full(4)
                       }
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "Link mode for this interface"
       ::= { mbgLtCfgEthernetIf2 9 }


mbgLtCfgEthernetIf3IPv4IP OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 address of the fourth ethernet interface"
       ::= { mbgLtCfgEthernetIf3 1 }

mbgLtCfgEthernetIf3IPv4Netmask OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 netmask of the fourth ethernet interface"
       ::= { mbgLtCfgEthernetIf3 2 }

mbgLtCfgEthernetIf3IPv4Gateway OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 gateway address of the fourth ethernet interface"
       ::= { mbgLtCfgEthernetIf3 3 }


mbgLtCfgEthernetIf3DHCPClient OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is DHCP used to get IP parameters for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf3 4 }

mbgLtCfgEthernetIf3IPv6IP1 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The first IPv6 address of the fourth ethernet interface"
       ::= { mbgLtCfgEthernetIf3 5 }

mbgLtCfgEthernetIf3IPv6IP2 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The second IPv6 address of the fourth ethernet interface"
       ::= { mbgLtCfgEthernetIf3 6 }

mbgLtCfgEthernetIf3IPv6IP3 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The third IPv6 address of the fourth ethernet interface"
       ::= { mbgLtCfgEthernetIf3 7 }

mbgLtCfgEthernetIf3IPv6Autoconf OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is IPv6 Autoconf used for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf3 8 }

mbgLtCfgEthernetIf3NetLinkMode OBJECT-TYPE

       SYNTAX  INTEGER {
                       autosensing(0),
                       link10half(1),
                       link10full(2),
                       link100half(3),
                       link100full(4)
                       }
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "Link mode for this interface"
       ::= { mbgLtCfgEthernetIf3 9 }


mbgLtCfgEthernetIf4IPv4IP OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 address of the fifth ethernet interface"
       ::= { mbgLtCfgEthernetIf4 1 }

mbgLtCfgEthernetIf4IPv4Netmask OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 netmask of the fifth ethernet interface"
       ::= { mbgLtCfgEthernetIf4 2 }

mbgLtCfgEthernetIf4IPv4Gateway OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 gateway address of the fifth ethernet interface"
       ::= { mbgLtCfgEthernetIf4 3 }


mbgLtCfgEthernetIf4DHCPClient OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is DHCP used to get IP parameters for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf4 4 }

mbgLtCfgEthernetIf4IPv6IP1 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The first IPv6 address of the fifth ethernet interface"
       ::= { mbgLtCfgEthernetIf4 5 }

mbgLtCfgEthernetIf4IPv6IP2 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The second IPv6 address of the fifth ethernet interface"
       ::= { mbgLtCfgEthernetIf4 6 }

mbgLtCfgEthernetIf4IPv6IP3 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The third IPv6 address of the fifth ethernet interface"
       ::= { mbgLtCfgEthernetIf4 7 }

mbgLtCfgEthernetIf4IPv6Autoconf OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is IPv6 Autoconf used for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf4 8 }

mbgLtCfgEthernetIf4NetLinkMode OBJECT-TYPE

       SYNTAX  INTEGER {
                       autosensing(0),
                       link10half(1),
                       link10full(2),
                       link100half(3),
                       link100full(4)
                       }
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "Link mode for this interface"
       ::= { mbgLtCfgEthernetIf4 9 }


mbgLtCfgEthernetIf5IPv4IP OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 address of the sixth ethernet interface"
       ::= { mbgLtCfgEthernetIf5 1 }

mbgLtCfgEthernetIf5IPv4Netmask OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 netmask of the sixth ethernet interface"
       ::= { mbgLtCfgEthernetIf5 2 }

mbgLtCfgEthernetIf5IPv4Gateway OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 gateway address of the sixth ethernet interface"
       ::= { mbgLtCfgEthernetIf5 3 }


mbgLtCfgEthernetIf5DHCPClient OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is DHCP used to get IP parameters for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf5 4 }

mbgLtCfgEthernetIf5IPv6IP1 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The first IPv6 address of the sixth ethernet interface"
       ::= { mbgLtCfgEthernetIf5 5 }

mbgLtCfgEthernetIf5IPv6IP2 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The second IPv6 address of the sixth ethernet interface"
       ::= { mbgLtCfgEthernetIf5 6 }

mbgLtCfgEthernetIf5IPv6IP3 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The third IPv6 address of the sixth ethernet interface"
       ::= { mbgLtCfgEthernetIf5 7 }

mbgLtCfgEthernetIf5IPv6Autoconf OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is IPv6 Autoconf used for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf5 8 }

mbgLtCfgEthernetIf5NetLinkMode OBJECT-TYPE

       SYNTAX  INTEGER {
                       autosensing(0),
                       link10half(1),
                       link10full(2),
                       link100half(3),
                       link100full(4)
                       }
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "Link mode for this interface"
       ::= { mbgLtCfgEthernetIf5 9 }


mbgLtCfgEthernetIf6IPv4IP OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 address of the seventh ethernet interface"
       ::= { mbgLtCfgEthernetIf6 1 }

mbgLtCfgEthernetIf6IPv4Netmask OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 netmask of the seventh ethernet interface"
       ::= { mbgLtCfgEthernetIf6 2 }

mbgLtCfgEthernetIf6IPv4Gateway OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 gateway address of the seventh ethernet interface"
       ::= { mbgLtCfgEthernetIf6 3 }


mbgLtCfgEthernetIf6DHCPClient OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is DHCP used to get IP parameters for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf6 4 }

mbgLtCfgEthernetIf6IPv6IP1 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The first IPv6 address of the seventh ethernet interface"
       ::= { mbgLtCfgEthernetIf6 5 }

mbgLtCfgEthernetIf6IPv6IP2 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The second IPv6 address of the seventh ethernet interface"
       ::= { mbgLtCfgEthernetIf6 6 }

mbgLtCfgEthernetIf6IPv6IP3 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The third IPv6 address of the seventh ethernet interface"
       ::= { mbgLtCfgEthernetIf6 7 }

mbgLtCfgEthernetIf6IPv6Autoconf OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is IPv6 Autoconf used for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf6 8 }

mbgLtCfgEthernetIf6NetLinkMode OBJECT-TYPE

       SYNTAX  INTEGER {
                       autosensing(0),
                       link10half(1),
                       link10full(2),
                       link100half(3),
                       link100full(4)
                       }
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "Link mode for this interface"
       ::= { mbgLtCfgEthernetIf6 9 }


mbgLtCfgEthernetIf7IPv4IP OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 address of the eighth ethernet interface"
       ::= { mbgLtCfgEthernetIf7 1 }

mbgLtCfgEthernetIf7IPv4Netmask OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 netmask of the eighth ethernet interface"
       ::= { mbgLtCfgEthernetIf7 2 }

mbgLtCfgEthernetIf7IPv4Gateway OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 gateway address of the eighth ethernet interface"
       ::= { mbgLtCfgEthernetIf7 3 }


mbgLtCfgEthernetIf7DHCPClient OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is DHCP used to get IP parameters for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf7 4 }

mbgLtCfgEthernetIf7IPv6IP1 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The first IPv6 address of the eighth ethernet interface"
       ::= { mbgLtCfgEthernetIf7 5 }

mbgLtCfgEthernetIf7IPv6IP2 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The second IPv6 address of the eighth ethernet interface"
       ::= { mbgLtCfgEthernetIf7 6 }

mbgLtCfgEthernetIf7IPv6IP3 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The third IPv6 address of the eighth ethernet interface"
       ::= { mbgLtCfgEthernetIf7 7 }

mbgLtCfgEthernetIf7IPv6Autoconf OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is IPv6 Autoconf used for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf7 8 }

mbgLtCfgEthernetIf7NetLinkMode OBJECT-TYPE

       SYNTAX  INTEGER {
                       autosensing(0),
                       link10half(1),
                       link10full(2),
                       link100half(3),
                       link100full(4)
                       }
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "Link mode for this interface"
       ::= { mbgLtCfgEthernetIf7 9 }


mbgLtCfgEthernetIf8IPv4IP OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 address of the nineth ethernet interface"
       ::= { mbgLtCfgEthernetIf8 1 }

mbgLtCfgEthernetIf8IPv4Netmask OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 netmask of the nineth ethernet interface"
       ::= { mbgLtCfgEthernetIf8 2 }

mbgLtCfgEthernetIf8IPv4Gateway OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 gateway address of the nineth ethernet interface"
       ::= { mbgLtCfgEthernetIf8 3 }


mbgLtCfgEthernetIf8DHCPClient OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is DHCP used to get IP parameters for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf8 4 }

mbgLtCfgEthernetIf8IPv6IP1 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The first IPv6 address of the nineth ethernet interface"
       ::= { mbgLtCfgEthernetIf8 5 }

mbgLtCfgEthernetIf8IPv6IP2 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The second IPv6 address of the nineth ethernet interface"
       ::= { mbgLtCfgEthernetIf8 6 }

mbgLtCfgEthernetIf8IPv6IP3 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The third IPv6 address of the nineth ethernet interface"
       ::= { mbgLtCfgEthernetIf8 7 }

mbgLtCfgEthernetIf8IPv6Autoconf OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is IPv6 Autoconf used for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf8 8 }

mbgLtCfgEthernetIf8NetLinkMode OBJECT-TYPE

       SYNTAX  INTEGER {
                       autosensing(0),
                       link10half(1),
                       link10full(2),
                       link100half(3),
                       link100full(4)
                       }
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "Link mode for this interface"
       ::= { mbgLtCfgEthernetIf8 9 }


mbgLtCfgEthernetIf9IPv4IP OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 address of the tenth ethernet interface"
       ::= { mbgLtCfgEthernetIf9 1 }

mbgLtCfgEthernetIf9IPv4Netmask OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 netmask of the tenth ethernet interface"
       ::= { mbgLtCfgEthernetIf9 2 }

mbgLtCfgEthernetIf9IPv4Gateway OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The IPv4 gateway address of the tenth ethernet interface"
       ::= { mbgLtCfgEthernetIf9 3 }


mbgLtCfgEthernetIf9DHCPClient OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is DHCP used to get IP parameters for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf9 4 }

mbgLtCfgEthernetIf9IPv6IP1 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The first IPv6 address of the tenth ethernet interface"
       ::= { mbgLtCfgEthernetIf9 5 }

mbgLtCfgEthernetIf9IPv6IP2 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The second IPv6 address of the tenth ethernet interface"
       ::= { mbgLtCfgEthernetIf9 6 }

mbgLtCfgEthernetIf9IPv6IP3 OBJECT-TYPE

       SYNTAX          DisplayString
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "The third IPv6 address of the tenth ethernet interface"
       ::= { mbgLtCfgEthernetIf9 7 }

mbgLtCfgEthernetIf9IPv6Autoconf OBJECT-TYPE

   SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Is IPv6 Autoconf used for this interface"
   --- "1 = true, 2 = false"
   ::= { mbgLtCfgEthernetIf9 8 }

mbgLtCfgEthernetIf9NetLinkMode OBJECT-TYPE

       SYNTAX  INTEGER {
                       autosensing(0),
                       link10half(1),
                       link10full(2),
                       link100half(3),
                       link100full(4)
                       }
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION
               "Link mode for this interface"
       ::= { mbgLtCfgEthernetIf9 9 }


-- -- SHS specific parameters --


mbgLtCfgSHS OBJECT IDENTIFIER ::= { mbgLtCfg 9 }


mbgLtCfgSHSTimeLimit OBJECT-TYPE

   SYNTAX      Integer32 (-2147483648..2147483647)
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Max. number of seconds the two SHS references can differ before a SHS Timelimit error is issued"
   ::= { mbgLtCfgSHS 1 }


-- -- NDT specific parameters --

mbgLtCfgNDT OBJECT IDENTIFIER ::= { mbgLtCfg 10 }

mbgLtCfgNDTMode OBJECT-TYPE

   SYNTAX      INTEGER {
                           master(0),
                           slave(1)
                       }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Operation mode of LANTIME NDT "
   --- "0 = NDT is operating as a master server, 1 = NDT is operating as a slave server"
   ::= { mbgLtCfgNDT 1 }


-- -- Lantime SNMP commands --

mbgLtCmd OBJECT IDENTIFIER  ::= { mbgLantime 5 }

mbgLtCmdExecute OBJECT-TYPE

   SYNTAX      INTEGER {
                   ready(0),
                   doReboot(1),
                   doFirmwareUpdate (2),
                   doReloadConfig (3),
                   doGenerateSSHKey (4),
                   doGenerateHTTPSKey (5),
                   doResetFactoryDefaults (6),
                   doGenerateNewNTPAutokeyCert (7),
                   doSendTestNotification (8),
                   doResetSHSTimeLimitError (9)
                   }
   MAX-ACCESS      read-write
   STATUS      current
   DESCRIPTION
       "Send a command to the timeserver to be executed"
   ::={ mbgLtCmd 1 }

mbgLtCmdSetRefTime OBJECT-TYPE

   SYNTAX      DisplayString
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Set the time of the reference clock and the LANTIME itself"

-- The new time has to be specified in UTC time and -- can be either written as a valid ISO8601 date and time string -- e.g. 2006-08-23 16:05:30 (=08/23/2006, 4:05:30pm) -- or a simple number representing the number of seconds -- since 01/01/1970

   ::={ mbgLtCmd 2 }


mbgLtConformance OBJECT IDENTIFIER ::= { mbgLantime 90 } mbgLtCompliances OBJECT IDENTIFIER ::= { mbgLtConformance 1 } mbgLtGroups OBJECT IDENTIFIER ::= { mbgLtConformance 2 }

mbgLtCompliance MODULE-COMPLIANCE

       STATUS  current
       DESCRIPTION 
                       "The compliance statement for SNMP entities which implement version 2
                       of the LANTIME MIB"
       MODULE  -- this module
               MANDATORY-GROUPS {
                       mbgLtObjectsGroup,
                       mbgLtTrapsGroup
               }
       ::= { mbgLtCompliances 1 }
               

mbgLtObjectsGroup OBJECT-GROUP

       OBJECTS {
               mbgLtCmdExecute,

mbgLtCmdSetRefTime,

               mbgLtCfgNDTMode,
               mbgLtCfgSHSTimeLimit,
               mbgLtCfgEthernetIf9NetLinkMode,
               mbgLtCfgEthernetIf9IPv6Autoconf,
               mbgLtCfgEthernetIf9IPv6IP3,
               mbgLtCfgEthernetIf9IPv6IP2,
               mbgLtCfgEthernetIf9IPv6IP1,
               mbgLtCfgEthernetIf9DHCPClient,
               mbgLtCfgEthernetIf9IPv4Gateway,
               mbgLtCfgEthernetIf9IPv4Netmask,
               mbgLtCfgEthernetIf9IPv4IP,
               mbgLtCfgEthernetIf8NetLinkMode,
               mbgLtCfgEthernetIf8IPv6Autoconf,
               mbgLtCfgEthernetIf8IPv6IP3,
               mbgLtCfgEthernetIf8IPv6IP2,
               mbgLtCfgEthernetIf8IPv6IP1,
               mbgLtCfgEthernetIf8DHCPClient,
               mbgLtCfgEthernetIf8IPv4Gateway,
               mbgLtCfgEthernetIf8IPv4Netmask,
               mbgLtCfgEthernetIf8IPv4IP,
               mbgLtCfgEthernetIf7NetLinkMode,
               mbgLtCfgEthernetIf7IPv6Autoconf,
               mbgLtCfgEthernetIf7IPv6IP3,
               mbgLtCfgEthernetIf7IPv6IP2,
               mbgLtCfgEthernetIf7IPv6IP1,
               mbgLtCfgEthernetIf7DHCPClient,
               mbgLtCfgEthernetIf7IPv4Gateway,
               mbgLtCfgEthernetIf7IPv4Netmask,
               mbgLtCfgEthernetIf7IPv4IP,
               mbgLtCfgEthernetIf6NetLinkMode,
               mbgLtCfgEthernetIf6IPv6Autoconf,
               mbgLtCfgEthernetIf6IPv6IP3,
               mbgLtCfgEthernetIf6IPv6IP2,
               mbgLtCfgEthernetIf6IPv6IP1,
               mbgLtCfgEthernetIf6DHCPClient,
               mbgLtCfgEthernetIf6IPv4Gateway,
               mbgLtCfgEthernetIf6IPv4Netmask,
               mbgLtCfgEthernetIf6IPv4IP,
               mbgLtCfgEthernetIf5NetLinkMode,
               mbgLtCfgEthernetIf5IPv6Autoconf,
               mbgLtCfgEthernetIf5IPv6IP3,
               mbgLtCfgEthernetIf5IPv6IP2,
               mbgLtCfgEthernetIf5IPv6IP1,
               mbgLtCfgEthernetIf5DHCPClient,
               mbgLtCfgEthernetIf5IPv4Gateway,
               mbgLtCfgEthernetIf5IPv4Netmask,
               mbgLtCfgEthernetIf5IPv4IP,
               mbgLtCfgEthernetIf4NetLinkMode,
               mbgLtCfgEthernetIf4IPv6Autoconf,
               mbgLtCfgEthernetIf4IPv6IP3,
               mbgLtCfgEthernetIf4IPv6IP2,
               mbgLtCfgEthernetIf4IPv6IP1,
               mbgLtCfgEthernetIf4DHCPClient,
               mbgLtCfgEthernetIf4IPv4Gateway,
               mbgLtCfgEthernetIf4IPv4Netmask,
               mbgLtCfgEthernetIf4IPv4IP,
               mbgLtCfgEthernetIf3NetLinkMode,
               mbgLtCfgEthernetIf3IPv6Autoconf,
               mbgLtCfgEthernetIf3IPv6IP3,
               mbgLtCfgEthernetIf3IPv6IP2,
               mbgLtCfgEthernetIf3IPv6IP1,
               mbgLtCfgEthernetIf3DHCPClient,
               mbgLtCfgEthernetIf3IPv4Gateway,
               mbgLtCfgEthernetIf3IPv4Netmask,
               mbgLtCfgEthernetIf3IPv4IP,
               mbgLtCfgEthernetIf2NetLinkMode,
               mbgLtCfgEthernetIf2IPv6Autoconf,
               mbgLtCfgEthernetIf2IPv6IP3,
               mbgLtCfgEthernetIf2IPv6IP2,
               mbgLtCfgEthernetIf2IPv6IP1,
               mbgLtCfgEthernetIf2DHCPClient,
               mbgLtCfgEthernetIf2IPv4Gateway,
               mbgLtCfgEthernetIf2IPv4Netmask,
               mbgLtCfgEthernetIf2IPv4IP,
               mbgLtCfgEthernetIf1NetLinkMode,
               mbgLtCfgEthernetIf1IPv6Autoconf,
               mbgLtCfgEthernetIf1IPv6IP3,
               mbgLtCfgEthernetIf1IPv6IP2,
               mbgLtCfgEthernetIf1IPv6IP1,
               mbgLtCfgEthernetIf1DHCPClient,
               mbgLtCfgEthernetIf1IPv4Gateway,
               mbgLtCfgEthernetIf1IPv4Netmask,
               mbgLtCfgEthernetIf1IPv4IP,
               mbgLtCfgEthernetIf0NetLinkMode,
               mbgLtCfgEthernetIf0IPv6Autoconf,
               mbgLtCfgEthernetIf0IPv6IP3,
               mbgLtCfgEthernetIf0IPv6IP2,
               mbgLtCfgEthernetIf0IPv6IP1,
               mbgLtCfgEthernetIf0DHCPClient,
               mbgLtCfgEthernetIf0IPv4Gateway,
               mbgLtCfgEthernetIf0IPv4Netmask,
               mbgLtCfgEthernetIf0IPv4IP,
               mbgLtCfgNotifyLeapSecond,
               mbgLtCfgNotifySHSTimeLimitError,
               mbgLtCfgNotifyConfigChanged,
               mbgLtCfgNotifyAntennaReconnect,
               mbgLtCfgNotifyAntennaFaulty,
               mbgLtCfgNotifyRefclockNotSync,
               mbgLtCfgNotifyRefclkNoResponse,
               mbgLtCfgNotifyServerBoot,
               mbgLtCfgNotifyNTPStopped,
               mbgLtCfgNotifyNTPNotSync,
               mbgLtCfgVP100Display2SN,
               mbgLtCfgVP100Display2IP,
               mbgLtCfgVP100Display1SN,
               mbgLtCfgVP100Display1IP,
               mbgLtCfgWMailAddress2,
               mbgLtCfgWMailAddress1,
               mbgLtCfgSNMPLocation,
               mbgLtCfgSNMPContact,
               mbgLtCfgSNMPReadWriteCommunity,
               mbgLtCfgSNMPReadOnlyCommunity,
               mbgLtCfgSNMPTrapRec2Community,
               mbgLtCfgSNMPTrapRec1Community,
               mbgLtCfgSNMPTrapReceiver2,
               mbgLtCfgSNMPTrapReceiver1,
               mbgLtCfgEMailSmarthost,
               mbgLtCfgEMailFrom,
               mbgLtCfgEMailTo,
               mbgLtCfgNTPAtomPPS,
               mbgLtCfgNTPAutokeyFeature,
               mbgLtCfgNTPBroadcastAutokey,
               mbgLtCfgNTPBroadcastKey,
               mbgLtCfgNTPBroadcastIP,
               mbgLtCfgNTPTrustedKey,
               mbgLtCfgNTPStratumLocalClock,
               mbgLtCfgNTPServer1Autokey,
               mbgLtCfgNTPServer1Key,
               mbgLtCfgNTPServer1IP,
               mbgLtCfgNTPServer1Prefer,
               mbgLtCfgNTPServer2Autokey,
               mbgLtCfgNTPServer2Key,
               mbgLtCfgNTPServer2IP,
               mbgLtCfgNTPServer2Prefer,
               mbgLtCfgNTPServer3Autokey,
               mbgLtCfgNTPServer3Key,
               mbgLtCfgNTPServer3IP,
               mbgLtCfgNTPServer3Prefer,
               mbgLtCfgNTPServer4Autokey,
               mbgLtCfgNTPServer4Key,
               mbgLtCfgNTPServer4IP,
               mbgLtCfgNTPServer4Prefer,
               mbgLtCfgNTPServer5Autokey,
               mbgLtCfgNTPServer5Key,
               mbgLtCfgNTPServer5IP,
               mbgLtCfgNTPServer5Prefer,
               mbgLtCfgNTPServer6Autokey,
               mbgLtCfgNTPServer6Key,
               mbgLtCfgNTPServer6IP,
               mbgLtCfgNTPServer6Prefer,
               mbgLtCfgNTPServer7Autokey,
               mbgLtCfgNTPServer7Key,
               mbgLtCfgNTPServer7IP,
               mbgLtCfgNTPServer7Prefer,
               mbgLtCfgSSHAccess,
               mbgLtCfgIPv6Access,
               mbgLtCfgSambaAccess,
               mbgLtCfgSNMPAccess,
               mbgLtCfgHTTPSAccess,
               mbgLtCfgHTTPAccess,
               mbgLtCfgFTPAccess,
               mbgLtCfgTelnetAccess,
               mbgLtCfgSyslogserver2,
               mbgLtCfgSyslogserver1,
               mbgLtCfgNameserver2,
               mbgLtCfgNameserver1,
               mbgLtCfgDomainname,
               mbgLtCfgHostname,
               mbgLtRefDctModeVal,
               mbgLtRefDctMode,
               mbgLtRefDctField,
               mbgLtRefDctStateVal,
               mbgLtRefDctState,
               mbgLtRefSHSTimeDiff,
               mbgLtRefSHSModeVal,
               mbgLtRefSHSMode,
               mbgLtRefIrigStateVal,
               mbgLtRefIrigState,
               mbgLtRefPzfModeVal,
               mbgLtRefPzfMode,
               mbgLtRefIrigModeVal,
               mbgLtRefIrigMode,
               mbgLtRefGpsModeVal,
               mbgLtRefGpsMode,
               mbgLtRefPzfField,
               mbgLtRefPzfKorrelation,
               mbgLtRefPzfStateVal,
               mbgLtRefPzfState,
               mbgLtRefGpsSatellitesInView,
               mbgLtRefGpsSatellitesGood,
               mbgLtRefGpsSatellites,
               mbgLtRefGpsPosition,
               mbgLtRefGpsStateVal,
               mbgLtRefGpsState,
               mbgLtRefClockModeVal,
               mbgLtRefClockMode,
               mbgLtRefClockTypeVal,
               mbgLtRefClockType,
               mbgLtNtpVersion,
               mbgLtNtpAuthKeyId,
               mbgLtNtpNumberOfRefclocks,
               mbgLtNtpActiveRefclockOffsetVal,
               mbgLtNtpActiveRefclockOffset,
               mbgLtNtpActiveRefclockName,
               mbgLtNtpActiveRefclockId,
               mbgLtNtpStratum,
               mbgLtNtpCurrentStateVal,
               mbgLtNtpCurrentState,
               mbgLtFirmwareVersionVal,
               mbgLtFirmwareVersion,
               mbgLtTrapMessage 
       }
       STATUS  current
       DESCRIPTION
                       "The collection of objects for the LANTIME MIB"
       ::= { mbgLtGroups 1 }
       

mbgLtTrapsGroup NOTIFICATION-GROUP

       NOTIFICATIONS {
               mbgLtTrapTestNotification,

mbgLtTrapPowerSupplyFailure, mbgLtTrapAntennaShortCircuit, mbgLtTrapNormalOperation,

               mbgLtTrapHeartbeat,
               mbgLtTrapSecondaryRecNotSync,
               mbgLtTrapSHSTimeLimitError,
               mbgLtTrapLeapSecondAnnounced,
               mbgLtTrapConfigChanged,
               mbgLtTrapAntennaReconnect,
               mbgLtTrapAntennaFaulty,
               mbgLtTrapReceiverNotSync,
               mbgLtTrapReceiverNotResponding,
               mbgLtTrapServerBoot,
               mbgLtTrapNTPStopped,
               mbgLtTrapNTPNotSync
       }
       STATUS  current
       DESCRIPTION
                       "The collection of traps for the LANTIME MIB"
       ::= { mbgLtGroups 2 }
       

END

Example handler script

The command specifies a command to be executed by snmptrapd upon reception by the command. This command is executed with the data of the trap as its standard input. The first line is the host name, the second the IP address of the trap sender, and the following lines consists of an OID VALUE pair with the data from the received trap.

A simple shell script to be called from snmptrapd is the following:

 #!/bin/sh
 
 read host
 read ip
 vars=
 
 while read oid val
 do
   if [ "$vars" = "" ]
   then
     vars="$oid = $val"
   else
     vars="$vars, $oid = $val"
   fi
 done
 
 echo trap: $1 $host $ip $vars

Now, given the following sample snmptrapd.conf file,

 # the generic traps
 traphandle SNMPv2-MIB::coldStart    /home/nba/bin/traps cold
 traphandle SNMPv2-MIB::warmStart    /home/nba/bin/traps warm
 traphandle IF-MIB::linkDown         /home/nba/bin/traps down
 traphandle IF-MIB::linkUp           /home/nba/bin/traps up
 traphandle SNMPv2-MIB::authenticationFailure /home/nba/bin/traps auth
 # this one is deprecated
 traphandle .1.3.6.1.6.3.1.1.5.6     /home/nba/bin/traps egp-neighbor-loss
 
 # enterprise specific traps
 traphandle UCD-TRAP-TEST-MIB::demoTrap /home/nba/bin/traps demo-trap
 traphandle UCD-NOTIFICATION-TEST-MIB::demoNotif /home/nba/bin/traps demo-notif

The following snmptrap invocation, to issue a generic Link down trap,

 % snmptrap -v 1 -c public localhost TRAP-TEST-MIB::demotraps localhost 2 0 "" \
       IF-MIB::ifIndex i 1

results in the following output from snmptrapd:

 1999-11-13 12:46:49 localhost [127.0.0.1]  TRAP-TEST-MIB::traps:
       Link Down Trap (0) Uptime: 1 day, 18:54:46.27
       IF-MIB::ifIndex.0 = 1

and the following output from the handler:

 trap: down localhost 127.0.0.1 SNMPv2-MIB::sysUpTime = 1:18:54:46.27, SNMPv2-MIB::snmpTrapOID = IF-MIB::linkDown, IF-MIB::ifIndex.0 = 1, SNMPv2-MIB::snmpTrapEnterprise = TRAP-TEST-MIB::traps

and issuing our enterprise specific trap gives this output from our handler:

 trap: demoTrap localhost 127.0.0.1 SNMPv2-MIB::sysUpTime = 1:19:00:48.01, SNMPv2-MIB::snmpTrapOID = UCD-TRAP-TEST-MIB::demoTrap, SNMPv2-MIB::sysLocation.0 = "just here", SNMPv2-MIB::snmpTrapEnterprise = UCD-TRAP-TEST-MIB::traps

and finally our enterprise specific notification:

 trap: demoNotif localhost 127.0.0.1 SNMPv2-MIB::sysUpTime.0 = 1:19:02:06.33, SNMPv2-MIB::snmpTrapOID.0 = UCD-NOTIFICATION-TEST-MIB::demoNotif, SNMPv2-MIB::sysLocation.0 = "just here"

Tutorial Sections

About the SNMP Protocol

These tutorial links talk about SNMP generically and how the protocol itself works. They are good introductory reading material and the concepts are important to understand before diving into the later tutorials about Net-SNMP itself.

Net-SNMP Command Line Applications

These tutorial pages discuss the command line tools provided in the Net-SNMP suite of tools. Nearly all the example commands in these tutorials works if you try it yourself, as they're all examples that talk to our online Net-SNMP test agent. Given them a shot!

Application Configuration

All of our applications support configuration to allow you to customize how they behave.

Net-SNMP Daemons

Net-SNMP comes with two long-running daemons: a SNMP agent (snmpd) for responding to management requests and a notification receiver (snmptrapd) for receiving SNMP notifications.

Coding Tutorials

Net-SNMP comes with a highly flexible and extensible API. The API allows you to create your own commands, add extensions to the agent to support your own MIBs and perform specialized processing of notifications.

Debugging SNMP Applications and Agents

All our tools and applications have extensive debugging output. These tutorials talk about how the debugging system works and how you can add your own debugging statements to you code:

Operating System Specific Tutorials