Difference between revisions of "TRAP"

From Net-SNMP Wiki
Jump to: navigation, search
(Created page with "{{protocol|GET|utility=snmptrap|ref=3416|snmp=1-3}} A '''TRAP''' is a one-way communication, and is one of two types of notifications that can be delivered over SNMP. An en...")
(No difference)

Revision as of 05:34, 19 July 2011

SNMP Protocol Operation
GET
SNMP Versions: SNMPv1-3
CLI Utility: snmptrap
Protocol List:

A TRAP is a one-way communication, and is one of two types of notifications that can be delivered over SNMP. An entity that receives a TRAP does not acknowledge that it has received it, and thus it is not possible for the sender to be assured that the TRAP successfully made it to the destination. Because of this, the usage of INFORMs are recommended instead.

TRAP Versions

SNMPv1 actually had a more complex TRAP definition that included a number of parameters.

In SNMPv2c, the TRAPv2 PDU was defined which is significantly simpler and matches the on-the-wire format of the other protocol operations.