UCD-SNMP-MIB DEFINITIONS ::= BEGIN -- Design notes: -- -- The design of this mib may seem unusual in parts, as it was -- designed for ease of numerical management routines. -- -- In that light, most sub-sections of this mib have four common -- numerical oid consistencies: -- -- 2021.ID.1 : an integer index value. In scalers, this is always -- of value 1. In tables it is a row index. -- 2021.ID.2 : a name of the script, process, etc. that this row represents. -- 2021.ID.100 : An error flag indicating if an error is present on -- that row (a threshold value was crossed, etc). -- 2021.ID.101 : An error string describing why the error flag is non-0. -- -- These conventions enable managers to easy examine portions of the -- mib by setting the ID to the sub-section they are interested in -- monitoring, and then scanning the .100 value to check for an -- error(s), and get a more specific error message from .101 for the -- named check found in .2. -- -- Row numbers between 2 and 100 are sub-section specific. -- -- Mib sections utilizing the above conventions: -- Tables: procTable, execTable, diskTable, loadTable -- Scalers: memory, snmperrs IMPORTS OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, Integer32, Opaque, enterprises, Counter32, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, TruthValue FROM SNMPv2-TC; ucdavis MODULE-IDENTITY LAST-UPDATED "200901190000Z" ORGANIZATION "University of California, Davis" CONTACT-INFO "This mib is no longer being maintained by the University of California and is now in life-support-mode and being maintained by the net-snmp project. The best place to write for public questions about the net-snmp-coders mailing list at net-snmp-coders@lists.sourceforge.net. postal: Wes Hardaker P.O. Box 382 Davis CA 95617 email: net-snmp-coders@lists.sourceforge.net " DESCRIPTION "This file defines the private UCD SNMP MIB extensions." REVISION "201105140000Z" DESCRIPTION "New objects for monitoring CPU Steal, Guest and Nice values" REVISION "200901190000Z" DESCRIPTION "New 64-bit objects for monitoring large disk usage" REVISION "200611220000Z" DESCRIPTION "Clarify behaviour of objects in the memory & systemStats groups (including updated versions of malnamed mem*Text objects). Define suitable TCs to describe error reporting/fix behaviour." REVISION "200404070000Z" DESCRIPTION "Added ssCpuRawSoftIRQ for Linux (2.6) and forgotten raw swap counters." REVISION "200209050000Z" DESCRIPTION "Deprecate the non-raw objects." REVISION "200109200000Z" DESCRIPTION "Group to monitor log files" REVISION "200101170000Z" DESCRIPTION "Added raw CPU and IO counters." REVISION "9912090000Z" DESCRIPTION "SMIv2 version converted from older MIB definitions." ::= { enterprises 2021 } -- Current UCD core mib table entries: -- prTable OBJECT IDENTIFIER ::= { ucdavis 2 } -- memory OBJECT IDENTIFIER ::= { ucdavis 4 } -- extTable OBJECT IDENTIFIER ::= { ucdavis 8 } -- diskTable OBJECT IDENTIFIER ::= { ucdavis 9 } -- loadTable OBJECT IDENTIFIER ::= { ucdavis 10 } -- systemStats OBJECT IDENTIFIER ::= { ucdavis 11 } -- ucdDemoMIB OBJECT IDENTIFIER ::= { ucdavis 14 } - UCD-DEMO-MIB -- fileTable OBJECT IDENTIFIER ::= { ucdavis 15 } -- logMatch OBJECT IDENTIFIER ::= { ucdavis 16 } -- version OBJECT IDENTIFIER ::= { ucdavis 100 } -- snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } -- mibRegistryTable OBJECT IDENTIFIER ::= { ucdavis 102 } -- Older mib table entries that were changed to new locations above: -- processes OBJECT IDENTIFIER ::= { ucdavis 1 } -- exec OBJECT IDENTIFIER ::= { ucdavis 3 } -- disk OBJECT IDENTIFIER ::= { ucdavis 6 } -- load OBJECT IDENTIFIER ::= { ucdavis 7 } -- Never implemented and removed from the mib: -- lockd OBJECT IDENTIFIER ::= { ucdavis 5 } -- Branches for registering other UCD MIB modules: ucdInternal OBJECT IDENTIFIER ::= { ucdavis 12 } ucdExperimental OBJECT IDENTIFIER ::= { ucdavis 13 } -- OID values assigned in the ucdExperimental branch: -- ucdIpFwAccMIB OBJECT IDENTIFIER ::= { ucdExperimental 1 } - UCD-IPFWACC-MIB -- ucdIpFilter OBJECT IDENTIFIER ::= { ucdExperimental 2 } - UCD-IPFILTER-MIB -- wavelan OBJECT IDENTIFIER ::= { ucdExperimental 3 } - WL-MIB -- ucdDlmodMIB OBJECT IDENTIFIER ::= { ucdExperimental 14 } - UCD-DLMOD-MIB -- ucdDiskIOMIB OBJECT IDENTIFIER ::= { ucdExperimental 15 } - UCD-DISKIO-MIB -- lmSensors OBJECT IDENTIFIER ::= { ucdExperimental 16 } - LM-SENSORS-MIB -- These are the old returned values of the agent type. -- originally returned to: .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 -- Current versions of the agent return an equivalent OID from the netSnmpAgentOIDs -- tree (defined in NET-SNMP-TC), which includes values for some additional O/Ss ucdSnmpAgent OBJECT IDENTIFIER ::= { ucdavis 250 } hpux9 OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 } sunos4 OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 } solaris OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 } osf OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 } ultrix OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 } hpux10 OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 } netbsd1 OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 } freebsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 } irix OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 } linux OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 } bsdi OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 } openbsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 12 } win32 OBJECT IDENTIFIER ::= { ucdSnmpAgent 13 } -- unlucky hpux11 OBJECT IDENTIFIER ::= { ucdSnmpAgent 14 } aix OBJECT IDENTIFIER ::= { ucdSnmpAgent 15 } macosx OBJECT IDENTIFIER ::= { ucdSnmpAgent 16 } dragonfly OBJECT IDENTIFIER ::= { ucdSnmpAgent 17 } unknown OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 } -- -- Define the Float Textual Convention -- This definition was written by David Perkins. -- Float ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A single precision floating-point number. The semantics and encoding are identical for type 'single' defined in IEEE Standard for Binary Floating-Point, ANSI/IEEE Std 754-1985. The value is restricted to the BER serialization of the following ASN.1 type: FLOATTYPE ::= [120] IMPLICIT FloatType (note: the value 120 is the sum of '30'h and '48'h) The BER serialization of the length for values of this type must use the definite length, short encoding form. For example, the BER serialization of value 123 of type FLOATTYPE is '9f780442f60000'h. (The tag is '9f78'h; the length is '04'h; and the value is '42f60000'h.) The BER serialization of value '9f780442f60000'h of data type Opaque is '44079f780442f60000'h. (The tag is '44'h; the length is '07'h; and the value is '9f780442f60000'h." SYNTAX Opaque (SIZE (7)) UCDErrorFlag ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a possible error condition" SYNTAX INTEGER { noError(0), error(1) } UCDErrorFix ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a 'push-button' object, to invoke a suitable configured action. Will always return 0 when read." SYNTAX INTEGER { noError(0), runFix(1) } -- -- Process table checks -- prTable OBJECT-TYPE SYNTAX SEQUENCE OF PrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information on running programs/daemons configured for monitoring in the snmpd.conf file of the agent. Processes violating the number of running processes required by the agent's configuration file are flagged with numerical and textual errors." ::= { ucdavis 2 } prEntry OBJECT-TYPE SYNTAX PrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a process and its statistics." INDEX { prIndex } ::= { prTable 1 } PrEntry ::= SEQUENCE { prIndex Integer32, prNames DisplayString, prMin Integer32, prMax Integer32, prCount Integer32, prErrorFlag UCDErrorFlag, prErrMessage DisplayString, prErrFix UCDErrorFix, prErrFixCmd DisplayString } prIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Reference Index for each observed process." ::= { prEntry 1 } prNames OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The process name we're counting/checking on." ::= { prEntry 2 } prMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of processes that should be running. An error flag is generated if the number of running processes is < the minimum." ::= { prEntry 3 } prMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of processes that should be running. An error flag is generated if the number of running processes is > the maximum." ::= { prEntry 4 } prCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current processes running with the name in question." ::= { prEntry 5 } prErrorFlag OBJECT-TYPE SYNTAX UCDErrorFlag MAX-ACCESS read-only STATUS current DESCRIPTION "A Error flag to indicate trouble with a process. It goes to 1 if there is an error, 0 if no error." ::= { prEntry 100 } prErrMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "An error message describing the problem (if one exists)." ::= { prEntry 101 } prErrFix OBJECT-TYPE SYNTAX UCDErrorFix MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to one will try to fix the problem if the agent has been configured with a script to call to attempt to fix problems automatically using remote snmp operations." ::= { prEntry 102 } prErrFixCmd OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The command that gets run when the prErrFix column is set to 1." ::= { prEntry 103 } extTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of extensible commands returning output and result codes. These commands are configured via the agent's snmpd.conf file." ::= { ucdavis 8 } extEntry OBJECT-TYPE SYNTAX ExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing an extensible script/program and its output." INDEX { extIndex } ::= { extTable 1 } ExtEntry ::= SEQUENCE { extIndex Integer32, extNames DisplayString, extCommand DisplayString, extResult Integer32, extOutput DisplayString, extErrFix UCDErrorFix, extErrFixCmd DisplayString } extIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Reference Index for extensible scripts. Simply an integer row number." ::= { extEntry 1 } extNames OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A Short, one name description of the extensible command." ::= { extEntry 2 } extCommand OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The command line to be executed." ::= { extEntry 3 } extResult OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The result code (exit status) from the executed command." ::= { extEntry 100 } extOutput OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The first line of output of the executed command." ::= { extEntry 101 } extErrFix OBJECT-TYPE SYNTAX UCDErrorFix MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to one will try to fix the problem if the agent has been configured with a script to call to attempt to fix problems automatically using remote snmp operations." ::= { extEntry 102 } extErrFixCmd OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The command that gets run when the extErrFix column is set to 1." ::= { extEntry 103 } -- -- Memory usage/watch reporting. -- Not supported on all systems! -- See agent/mibgroup/ucd_snmp.h to see if its loaded for your architecture. -- memory OBJECT IDENTIFIER ::= { ucdavis 4 } memIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bogus Index. This should always return the integer 0." ::= { memory 1 } memErrorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Bogus Name. This should always return the string 'swap'." ::= { memory 2 } memTotalSwap OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of swap space configured for this host." ::= { memory 3 } memAvailSwap OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of swap space currently unused or available." ::= { memory 4 } memTotalReal OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of real/physical memory installed on this host." ::= { memory 5 } memAvailReal OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of real/physical memory currently unused or available." ::= { memory 6 } memTotalSwapTXT OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of swap space or virtual memory allocated for text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of swap space or virtual memory." ::= { memory 7 } memAvailSwapTXT OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The amount of swap space or virtual memory currently being used by text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of swap space or virtual memory. Note that (despite the name), this value reports the amount used, rather than the amount free or available for use. For clarity, this object is being deprecated in favour of 'memUsedSwapTXT(16)." ::= { memory 8 } memTotalRealTXT OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of real/physical memory allocated for text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of physical memory." ::= { memory 9 } memAvailRealTXT OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The amount of real/physical memory currently being used by text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of physical memory. Note that (despite the name), this value reports the amount used, rather than the amount free or available for use. For clarity, this object is being deprecated in favour of 'memUsedRealTXT(17)." ::= { memory 10 } memTotalFree OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of memory free or available for use on this host. This value typically covers both real memory and swap space or virtual memory." ::= { memory 11 } memMinimumSwap OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum amount of swap space expected to be kept free or available during normal operation of this host. If this value (as reported by 'memAvailSwap(4)') falls below the specified level, then 'memSwapError(100)' will be set to 1 and an error message made available via 'memSwapErrorMsg(101)'." ::= { memory 12 } memShared OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of real or virtual memory currently allocated for use as shared memory. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose." ::= { memory 13 } memBuffer OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of real or virtual memory currently allocated for use as memory buffers. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose." ::= { memory 14 } memCached OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of real or virtual memory currently allocated for use as cached memory. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose." ::= { memory 15 } memUsedSwapTXT OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of swap space or virtual memory currently being used by text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of swap space or virtual memory." ::= { memory 16 } memUsedRealTXT OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of real/physical memory currently being used by text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of physical memory." ::= { memory 17 } memSwapError OBJECT-TYPE SYNTAX UCDErrorFlag MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the amount of available swap space (as reported by 'memAvailSwap(4)'), is less than the desired minimum (specified by 'memMinimumSwap(12)')." ::= { memory 100 } memSwapErrorMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Describes whether the amount of available swap space (as reported by 'memAvailSwap(4)'), is less than the desired minimum (specified by 'memMinimumSwap(12)')." ::= { memory 101 } dskTable OBJECT-TYPE SYNTAX SEQUENCE OF DskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Disk watching information. Partions to be watched are configured by the snmpd.conf file of the agent." ::= { ucdavis 9 } dskEntry OBJECT-TYPE SYNTAX DskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a disk and its statistics." INDEX { dskIndex } ::= { dskTable 1 } DskEntry ::= SEQUENCE { dskIndex Integer32, dskPath DisplayString, dskDevice DisplayString, dskMinimum Integer32, dskMinPercent Integer32, dskTotal Integer32, dskAvail Integer32, dskUsed Integer32, dskPercent Integer32, dskPercentNode Integer32, dskErrorFlag UCDErrorFlag, dskErrorMsg DisplayString, dskTotalLow Unsigned32, dskTotalHigh Unsigned32, dskAvailLow Unsigned32, dskAvailHigh Unsigned32, dskUsedLow Unsigned32, dskUsedHigh Unsigned32 } dskIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Integer reference number (row number) for the disk mib." ::= { dskEntry 1 } dskPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Path where the disk is mounted." ::= { dskEntry 2 } dskDevice OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Path of the device for the partition" ::= { dskEntry 3 } dskMinimum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum space required on the disk (in kBytes) before the errors are triggered. Either this or dskMinPercent is configured via the agent's snmpd.conf file." ::= { dskEntry 4 } dskMinPercent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of minimum space required on the disk before the errors are triggered. Either this or dskMinimum is configured via the agent's snmpd.conf file." ::= { dskEntry 5 } dskTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total size of the disk/partion (kBytes). For large disks (>2Tb), this value will latch at INT32_MAX (2147483647)." ::= { dskEntry 6 } dskAvail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available space on the disk. For large lightly-used disks (>2Tb), this value will latch at INT32_MAX (2147483647)." ::= { dskEntry 7 } dskUsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used space on the disk. For large heavily-used disks (>2Tb), this value will latch at INT32_MAX (2147483647)." ::= { dskEntry 8 } dskPercent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of space used on disk" ::= { dskEntry 9 } dskPercentNode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of inodes used on disk" ::= { dskEntry 10 } dskTotalLow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total size of the disk/partion (kBytes). Together with dskTotalHigh composes 64-bit number." ::= { dskEntry 11 } dskTotalHigh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total size of the disk/partion (kBytes). Together with dskTotalLow composes 64-bit number." ::= { dskEntry 12 } dskAvailLow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available space on the disk (kBytes). Together with dskAvailHigh composes 64-bit number." ::= { dskEntry 13 } dskAvailHigh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available space on the disk (kBytes). Together with dskAvailLow composes 64-bit number." ::= { dskEntry 14 } dskUsedLow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used space on the disk (kBytes). Together with dskUsedHigh composes 64-bit number." ::= { dskEntry 15 } dskUsedHigh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used space on the disk (kBytes). Together with dskUsedLow composes 64-bit number." ::= { dskEntry 16 } dskErrorFlag OBJECT-TYPE SYNTAX UCDErrorFlag MAX-ACCESS read-only STATUS current DESCRIPTION "Error flag signaling that the disk or partition is under the minimum required space configured for it." ::= { dskEntry 100 } dskErrorMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A text description providing a warning and the space left on the disk." ::= { dskEntry 101 } laTable OBJECT-TYPE SYNTAX SEQUENCE OF LaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Load average information." ::= { ucdavis 10 } laEntry OBJECT-TYPE SYNTAX LaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a load average and its values." INDEX { laIndex } ::= { laTable 1 } LaEntry ::= SEQUENCE { laIndex Integer32, laNames DisplayString, laLoad DisplayString, laConfig DisplayString, laLoadInt Integer32, laLoadFloat Float, laErrorFlag UCDErrorFlag, laErrMessage DisplayString } laIndex OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "reference index/row number for each observed loadave." ::= { laEntry 1 } laNames OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The list of loadave names we're watching." ::= { laEntry 2 } laLoad OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The 1,5 and 15 minute load averages (one per row)." ::= { laEntry 3 } laConfig OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The watch point for load-averages to signal an error. If the load averages rises above this value, the laErrorFlag below is set." ::= { laEntry 4 } laLoadInt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The 1,5 and 15 minute load averages as an integer. This is computed by taking the floating point loadaverage value and multiplying by 100, then converting the value to an integer." ::= { laEntry 5 } laLoadFloat OBJECT-TYPE SYNTAX Float MAX-ACCESS read-only STATUS current DESCRIPTION "The 1,5 and 15 minute load averages as an opaquely wrapped floating point number." ::= { laEntry 6 } laErrorFlag OBJECT-TYPE SYNTAX UCDErrorFlag MAX-ACCESS read-only STATUS current DESCRIPTION "A Error flag to indicate the load-average has crossed its threshold value defined in the snmpd.conf file. It is set to 1 if the threshold is crossed, 0 otherwise." ::= { laEntry 100 } laErrMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "An error message describing the load-average and its surpased watch-point value." ::= { laEntry 101 } version OBJECT IDENTIFIER ::= { ucdavis 100 } versionIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index to mib (always 0)" ::= { version 1 } versionTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "CVS tag keyword" ::= { version 2 } versionDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Date string from RCS keyword" ::= { version 3 } versionCDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Date string from ctime() " ::= { version 4 } versionIdent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Id string from RCS keyword" ::= { version 5 } versionConfigureOptions OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Options passed to the configure script when this agent was built." ::= { version 6 } versionClearCache OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set to 1 to clear the exec cache, if enabled" ::= { version 10 } versionUpdateConfig OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set to 1 to read-read the config file(s)." ::= { version 11 } versionRestartAgent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set to 1 to restart the agent." ::= { version 12 } versionSavePersistentData OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set to 1 to force the agent to save it's persistent data immediately." ::= { version 13 } versionDoDebugging OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set to 1 to turn debugging statements on in the agent or 0 to turn it off." ::= { version 20 } snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } snmperrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bogus Index for snmperrs (always 0)." ::= { snmperrs 1 } snmperrNames OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "snmp" ::= { snmperrs 2 } snmperrErrorFlag OBJECT-TYPE SYNTAX UCDErrorFlag MAX-ACCESS read-only STATUS current DESCRIPTION "A Error flag to indicate trouble with the agent. It goes to 1 if there is an error, 0 if no error." ::= { snmperrs 100 } snmperrErrMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "An error message describing the problem (if one exists)." ::= { snmperrs 101 } mrTable OBJECT-TYPE SYNTAX SEQUENCE OF MrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table displaying all the oid's registered by mib modules in the agent. Since the agent is modular in nature, this lists each module's OID it is responsible for and the name of the module" ::= { ucdavis 102 } mrEntry OBJECT-TYPE SYNTAX MrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a registered mib oid." INDEX { IMPLIED mrIndex } ::= { mrTable 1 } MrEntry ::= SEQUENCE { mrIndex OBJECT IDENTIFIER, mrModuleName DisplayString } mrIndex OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The registry slot of a mibmodule." ::= { mrEntry 1 } mrModuleName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The module name that registered this OID." ::= { mrEntry 2 } systemStats OBJECT IDENTIFIER ::= { ucdavis 11 } ssIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bogus Index. This should always return the integer 1." ::= { systemStats 1 } ssErrorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Bogus Name. This should always return the string 'systemStats'." ::= { systemStats 2 } ssSwapIn OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The average amount of memory swapped in from disk, calculated over the last minute." ::= { systemStats 3 } ssSwapOut OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The average amount of memory swapped out to disk, calculated over the last minute." ::= { systemStats 4 } ssIOSent OBJECT-TYPE SYNTAX Integer32 UNITS "blocks/s" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The average amount of data written to disk or other block device, calculated over the last minute. This object has been deprecated in favour of 'ssIORawSent(57)', which can be used to calculate the same metric, but over any desired time period." ::= { systemStats 5 } ssIOReceive OBJECT-TYPE SYNTAX Integer32 UNITS "blocks/s" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The average amount of data read from disk or other block device, calculated over the last minute. This object has been deprecated in favour of 'ssIORawReceived(58)', which can be used to calculate the same metric, but over any desired time period." ::= { systemStats 6 } ssSysInterrupts OBJECT-TYPE SYNTAX Integer32 UNITS "interrupts/s" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The average rate of interrupts processed (including the clock) calculated over the last minute. This object has been deprecated in favour of 'ssRawInterrupts(59)', which can be used to calculate the same metric, but over any desired time period." ::= { systemStats 7 } ssSysContext OBJECT-TYPE SYNTAX Integer32 UNITS "switches/s" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The average rate of context switches, calculated over the last minute. This object has been deprecated in favour of 'ssRawContext(60)', which can be used to calculate the same metric, but over any desired time period." ::= { systemStats 8 } ssCpuUser OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The percentage of CPU time spent processing user-level code, calculated over the last minute. This object has been deprecated in favour of 'ssCpuRawUser(50)', which can be used to calculate the same metric, but over any desired time period." ::= { systemStats 9 } ssCpuSystem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The percentage of CPU time spent processing system-level code, calculated over the last minute. This object has been deprecated in favour of 'ssCpuRawSystem(52)', which can be used to calculate the same metric, but over any desired time period." ::= { systemStats 10 } ssCpuIdle OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The percentage of processor time spent idle, calculated over the last minute. This object has been deprecated in favour of 'ssCpuRawIdle(53)', which can be used to calculate the same metric, but over any desired time period." ::= { systemStats 11 } -- The agent only implements those of the following counters that the -- kernel supports! Don't expect all to be present. ssCpuRawUser OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ticks' (typically 1/100s) spent processing user-level code. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors)." ::= { systemStats 50 } ssCpuRawNice OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ticks' (typically 1/100s) spent processing reduced-priority code. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors)." ::= { systemStats 51 } ssCpuRawSystem OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ticks' (typically 1/100s) spent processing system-level code. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). This object may sometimes be implemented as the combination of the 'ssCpuRawWait(54)' and 'ssCpuRawKernel(55)' counters, so care must be taken when summing the overall raw counters." ::= { systemStats 52 } ssCpuRawIdle OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ticks' (typically 1/100s) spent idle. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors)." ::= { systemStats 53 } ssCpuRawWait OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ticks' (typically 1/100s) spent waiting for IO. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. This time may also be included within the 'ssCpuRawSystem(52)' counter. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors)." ::= { systemStats 54 } ssCpuRawKernel OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ticks' (typically 1/100s) spent processing kernel-level code. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. This time may also be included within the 'ssCpuRawSystem(52)' counter. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors)." ::= { systemStats 55 } ssCpuRawInterrupt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ticks' (typically 1/100s) spent processing hardware interrupts. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors)." ::= { systemStats 56 } ssIORawSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of blocks sent to a block device" ::= { systemStats 57 } ssIORawReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of blocks received from a block device" ::= { systemStats 58 } ssRawInterrupts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of interrupts processed" ::= { systemStats 59 } ssRawContexts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of context switches" ::= { systemStats 60 } ssCpuRawSoftIRQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ticks' (typically 1/100s) spent processing software interrupts. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors)." ::= { systemStats 61 } ssRawSwapIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of blocks swapped in" ::= { systemStats 62 } ssRawSwapOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of blocks swapped out" ::= { systemStats 63 } ssCpuRawSteal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ticks' (typically 1/100s) spent by the hypervisor code to run other VMs even though the CPU in the current VM had something runnable. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors)." ::= { systemStats 64 } ssCpuRawGuest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ticks' (typically 1/100s) spent by the CPU to run a virtual CPU (guest). This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors)." ::= { systemStats 65 } ssCpuRawGuestNice OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ticks' (typically 1/100s) spent by the CPU to run a niced virtual CPU (guest). This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors)." ::= { systemStats 66 } -- possibly used in the future: -- -- ssErrorFlag OBJECT-TYPE -- SYNTAX UCDErrorFlag -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Error flag." -- ::= { systemStats 100 } -- -- ssErrMessage OBJECT-TYPE -- SYNTAX DisplayString -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Error message describing the errorflag condition." -- ::= { systemStats 101 } ucdTraps OBJECT IDENTIFIER ::= { ucdavis 251 } ucdStart NOTIFICATION-TYPE STATUS current DESCRIPTION "This trap could in principle be sent when the agent start" ::= { ucdTraps 1 } ucdShutdown NOTIFICATION-TYPE STATUS current DESCRIPTION "This trap is sent when the agent terminates" ::= { ucdTraps 2 } -- -- File Table: monitor a list of files to check for a maximum size. -- fileTable OBJECT-TYPE SYNTAX SEQUENCE OF FileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of monitored files." ::= { ucdavis 15 } fileEntry OBJECT-TYPE SYNTAX FileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of file" INDEX { fileIndex } ::= { fileTable 1 } FileEntry ::= SEQUENCE { fileIndex Integer32, fileName DisplayString, fileSize Integer32, fileMax Integer32, fileErrorFlag UCDErrorFlag, fileErrorMsg DisplayString } fileIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of file" ::= { fileEntry 1 } fileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Filename" ::= { fileEntry 2 } fileSize OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "Size of file (kB)" ::= { fileEntry 3 } fileMax OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "Limit of filesize (kB)" ::= { fileEntry 4 } fileErrorFlag OBJECT-TYPE SYNTAX UCDErrorFlag MAX-ACCESS read-only STATUS current DESCRIPTION "Limit exceeded flag" ::= { fileEntry 100 } fileErrorMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Filesize error message" ::= { fileEntry 101 } logMatch OBJECT IDENTIFIER ::= { ucdavis 16 } logMatchMaxEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of logmatch entries this snmpd daemon can support." ::= { logMatch 1 } logMatchTable OBJECT-TYPE SYNTAX SEQUENCE OF LogMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of monitored files." ::= { logMatch 2 } logMatchEntry OBJECT-TYPE SYNTAX LogMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of file" INDEX { logMatchIndex } ::= { logMatchTable 1 } LogMatchEntry ::= SEQUENCE { logMatchIndex Integer32, logMatchName DisplayString, logMatchFilename DisplayString, logMatchRegEx DisplayString, logMatchGlobalCounter Counter32, logMatchGlobalCount Integer32, logMatchCurrentCounter Counter32, logMatchCurrentCount Integer32, logMatchCounter Counter32, logMatchCount Integer32, logMatchCycle Integer32, logMatchErrorFlag UCDErrorFlag, logMatchRegExCompilation DisplayString } logMatchIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of logmatch" ::= { logMatchEntry 1 } logMatchName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "logmatch instance name" ::= { logMatchEntry 2 } logMatchFilename OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "filename to be logmatched" ::= { logMatchEntry 3 } logMatchRegEx OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "regular expression" ::= { logMatchEntry 4 } logMatchGlobalCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "global count of matches" ::= { logMatchEntry 5 } logMatchGlobalCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { logMatchEntry 6 } logMatchCurrentCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regex match counter. This counter will be reset with each logfile rotation." ::= { logMatchEntry 7 } logMatchCurrentCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { logMatchEntry 8 } logMatchCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regex match counter. This counter will be reset with each read" ::= { logMatchEntry 9 } logMatchCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { logMatchEntry 10 } logMatchCycle OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "time between updates (if not queried) in seconds" ::= { logMatchEntry 11 } logMatchErrorFlag OBJECT-TYPE SYNTAX UCDErrorFlag MAX-ACCESS read-only STATUS current DESCRIPTION "errorflag: is this line configured correctly?" ::= { logMatchEntry 100 } logMatchRegExCompilation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "message of regex precompilation" ::= { logMatchEntry 101 } END